Mining

Product Applications

With an extensive track record, our coatings are proven to extend the design life of the production facilities and improve cash flow due to less downtime.

Filter by

Products

219 Product Found
My Filters
    Structural Concrete- Repair and Protection
    Intercrete 4804 (formerly Marine Mortar S)
    A two component, water-based (VOC-free), fibre reinforced, polymer modified, cementitious mortar with excellent adhesion for use in areas subject to early immersion. Intercrete 4804 cures rapidly to produce a high strength mortar with enhanced polymeric properties for the repair of voids in aggressive marine environments. Suitable for thicknesses up to 50mm.
    Structural Concrete- Repair and Protection
    Intercrete 4874 (formerly Cemprotec 2000-BJT)
    A high performance butyl tape which is designed to join two pieces of Intercrete 4872 waterproof composite tape together. Embedded into our Intercrete range of cementitious coatings, it forms an elastomeric joint between two lengths of tape to accommodate movement.
    Other
    Enviroline 405HTR MR System
    Enviroline 405HTR MR is a reinforced chemcial resistant system. The system features a high temperature reesistant, 100% volume high solids, two component polycyclamine cured lining topcoat. Fibre glass mat reinforcement increases physical properties and where necessary allows dynamic crack bridging in concrete.In the table below you can find System Sheet and Application guidelines. For Technical Datasheets and MSDSs please click on the links to the individual component products of the system below the table.
    Structural Concrete- Repair and Protection
    Intercrete 4811 (formerly Bond-Prime)
    A single component, water-based (VOC free), rapid curing, acrylic copolymer modified with a unique water-emulsified epoxy cross-linking agent. Intercrete 4811 is inherently hydrophobic and alkali resistant, making it ideal for application to a wide range of new and aged mineral substrates.
    It is non-hazardous, and application is by brush, roller or airless spray to prime and stabilise surfaces prior to the application of Flexcrete’s specialist membranes. Intercrete 4811 cures to form a clear film with an identifying green tint, both on and within the substrate, to provide an ideal surface for subsequent treatment.
    Structural Concrete- Repair and Protection
    Intercrete 4807 (formerly Ttiefill)
    A single component, water-based (VOC free), polymer modified, fibre reinforced, Portland cement based repair compound which exhibits unique hydraulic properties to produce a rapid setting curing mortar with enhanced polymer properties.
    Intercrete 4807 is ideally suited for the filling of voids, particularly in new construction, which needs to be rapidly put into service, such as tieholes, grout holes and voids around fixings.
    Structural Concrete- Repair and Protection
    Intercrete 4805 (formerly Monopour)
    A single component, water-based (VOC free), high performance, polymer modified, non-shrink cementitious formulation. Intercrete 4805 is a flowing grout with a maximum aggregate size of 2.5mm for application thicknesses up to 100mm.
    Other
    Intercrete 4816
    Structural Concrete- Repair and Protection
    Intercrete 4810 (formerly Polymer Admixture 850)
    A single component, water-based (VOC free), advanced copolymer dispersion which, when used as an admixture for sand and cement mixes, produces a high strength waterproof patching mortar, screed or render. It can also be mixed with cement to produce a slurry for sealing porous and absorbent substrates.
    Structural Concrete- Repair and Protection
    Intercrete 4854 (formerly Cemprotec EF Grit)
    A quartz aggregate for abrasion and skid resistance for use within INTERCRETE-Floor systems
    Structural Concrete- Repair and Protection
    Intercrete 4853 (formerly Cemprotec Levelling Coat)
    A two component epoxy and polymer modified cementitious coating / wearing screed for levelling and waterproofing concrete substrates. It incorporates advanced cement chemistry, metakaolin, fibre, epoxy and styrene acrylic copolymer technology to give enhanced performance and excellent adhesion to concrete surfaces. When mixed, it exhibits a degree of flow to enable ease of application by pouring or pumping techniques to give an even finish. It hydrates to form a dense screed, which exhibits both polymeric and resinous properties giving low permeability to water and ensuring long term performance. It is specially formulated to harden rapidly to form a durable surface, which can typically be overcoated within 24 hours.
    Structural Concrete- Repair and Protection
    Intercrete 4843
    Structural Concrete- Repair and Protection
    Intercrete 4814 (formerly Monosil)
    A single component, water-based (VOC free), mixture of silane, siloxane and synthetic resins which imparts maximum water and oil repellency to mineral substrates. It penetrates the surface pores to minimise its effect on the appearance of the substrate and has minimal effect on the water vapour diffusion characteristics.
    Other
    Interzinc 52E
    Interzinc 52E is a high solids, two component, metallic zinc-rich epoxy primer utilising advanced phenalkamine technology to offer improved productivity through fast dry and rapid recoatability.
    Structural Concrete- Repair and Protection
    Intercrete 4878 (formerly Cemprotec Flex-Tape)
    A multi-directional nylon polyamide tape, available in light and heavy duty grades.
    Structural Concrete- Repair and Protection
    Intercrete 4812 (formerly Bonding Bridge 842)
    A single component, water-based (VOC free), advanced, polymer modified, cementitious surface impregnant with high penetration into concrete.
    Fetching the data, please wait...