A high performance, two-component chemically-cured 100% solids epoxy penetrating sealer.

A two component, rapid recoat, fast curing solvent based inorganic zinc rich ethyl silicate primer. Conforms to SSPC Paint 20 Level 3. Available in ASTM D520, Type II zinc dust version as standard.

A high performance, two-component chemically-cured aliphatic urethane gloss finish. *Please note this product is only available in North America.

A single component, high temperature coating based on a moisture-curing silicone binder, Intertherm 50 is ideal for the protection of steel from corrosion at temperatures up to 540°C (1004°F). The moisture-curing crosslinking technology of Intertherm 50 allows multiple coats to be applied without heat curing.

Intergard 475HS is a low VOC, high solids, high build epoxy used to improve barrier protection for a range of anticorrosive coating systems in a wide range of aggressive environments. Intergard 475HS can be pigmented with MIO to provide improved overcoating properties, better facilitating application in the fabrication shop.

Part of the Interzinc 22 series of products.A two component, rapid recoat, fast curing solvent based inorganic zinc rich ethyl silicate primer. Conforms to SSPC Paint 20 Level 2Available in ASTM D520, Type II zinc dust version as standard.

A two component, heavy duty vinyl ester coating reinforced with glass flake to increase chemical and abrasion resistance.A chemically resistant, vinyl ester coating which can be applied using standard airless spray equipment at material temperatures up to 35°C (95°F).

Ceilcote 165 Grout is a carefully blended, three component vinylester grout. It is designed for grouting pumps, vessels and equipment that are subjected to chemical exposure.

A highly crosslinked, two component, high build epoxy phenolic coating, Intertherm 228HS combines properties of corrosion and chemical resistance when used in high temperature service. Based upon novolac resin technology, Intertherm 228HS can be used in a wide range of highly corrosive environments operating at temperatures up to 230°C (446°F).

A two component, gloss, low VOC, high solids, fast drying polyaspartic primer/finish coating. Intercure 3240G provides improved productivity at ambient temperature application whilst combining the anti-corrosive performance of epoxy coatings and high aesthetics of UV durable topcoats in a single coat application. Intercure 3240G is applied as a single coat direct to correctly prepared substrates using manual mix (single leg) or automatic mix (plural leg) application equipment, reducing application time, energy consumption and labour costs when compared to two coat applications, or single coat applications which require force drying at high temperature.

A low VOC, two component modified acrylic polyurethane finish giving excellent durability and long-term
recoatability, for use over correctly prepared primed surfaces. This product is also HAPS free and
exempt solvent free.

A two component epoxy anti-corrosive primer.

A solvent free, two component, high build, surface tolerant epoxy coating capable of being applied as a single or multi-coat system over abrasive blasted, hydroblasted or mechanically prepared steel surfaces.

A solvent free, two component polycyclamine cured girth weld coating system utilising advanced epoxy novolac technology.

Boron-free Chartek 8E provides exceptional pool fire performance with up to 30% lower installed weight compared to alternative PFP products, allowing for greater flexibility in structural design. It improves coating efficiency through reduced number of coats and no mesh requirement for up to 60 minutes pool fire duration.