BACK TO PRODUCTS

Offshore Oil and Gas

Product Applications

We offer a complete coating solution range for the most demanding offshore environments around the world.

CASES

Fireproofing an offshore giant

Filter by

Products

186 Product Found
My Filters
    Primer
    Interdur 8805
    A two component, rapid recoat, fast curing solvent based inorganic zinc rich ethyl silicate primer. Conforms to SSPC Paint 20 Level 3. Available in ASTM D520, Type II zinc dust version as standard.
    Passive Fire Protection
    Chartek 8E
    Boron-free Chartek 8E provides exceptional pool fire performance with up to 30% lower installed weight compared to alternative PFP products, allowing for greater flexibility in structural design. It improves coating efficiency through reduced number of coats and no mesh requirement for up to 60 minutes pool fire duration.
    Passive Fire Protection
    Chartek 1960 CSP
    Chartek 1960CSP intumescent material combined hydrocarbon fire protection and insulation against cryogenic liquid exposure.
    Passive Fire Protection
    Chartek 7E
    A self-reinforced epoxy coating, Chartek 7E simplifies application giving the oil and gas industry more choice and greater efficiency than ever before. Chartek 7E offers outstanding pool and jet fire resistance for up to two hours and a significant reduction in installed weight against other PFP products in the market.
    Primer
    Interzone 1020
    A two component, glass flake reinforced ambient cure isophthalic polyester coating.
    Other
    Interplus 4102 Odin Gel
    A single component, water-based rust remover / cleaner gel. Interplus 4102 Odin Gel is 100% biologically degradable, free for toxins and conforms to the yellow classification of the Harmonised Offshore Chemical Notification Format (HOCNF).
    Primer
    Interdur 8809
    Interdur 8809 is a two component, metallic zinc rich epoxy primer which complies with the composition and performance requirements of HG/T3668. CHINA ONLY
    Temperature Resistance
    Intertherm 2205
    Intertherm 2205 is a specialist temperature resistant maintenance coating, designed to resist corrosion under insulation (CUI) and high temperatures up to 230°C (446°F). Based on innovative, hot spread epoxy technology Intertherm 2205 shows excellent application characteristics and can be brush applied to hand prepared, hot steel up to 205°C (401°F).
    Primer
    Intergard 7500
    A two component, high volume solids, abrasion resistant pure epoxy coating pigmented with aluminium that provides excellent long term anti-corrosive protection. Intergard 7500 is capable of fast cure and has low temperature cure properties. Ideally suited for use as a universal primer in protecting underwater areas, splashzones, decks and structural steel.
    Intermediate
    Intergard 2005
    A two component high build epoxy semi gloss finish.
    Finish
    Interfine 2700
    Direct-to-Metal epoxy polysiloxane finish
    Surface Pre-Treatment
    Interplus 4103
    A single component, water-based rust remover / cleaner concentrated fluid. Clean Cons is 100% biologically degradable, free from toxins and conforms to the yellow classification of the Harmonised Offshore Chemical Notification Format (HOCNF).
    Primer-Finish
    Interthane 3230SG
    A two component, semi- gloss, low VOC, high solids, fast curing, polyurethane primer/finish pigmented with zinc phosphate to provide added anti-corrosive performance and a durable, decorative finish.
    Primer-Finish
    Interthane 3230HG
    A two component, high gloss, low VOC, high solids, fast curing, polyurethane primer/finish pigmented with zinc phosphate to provide added anti-corrosive performance and a durable, decorative finish.
    Finish
    Interdur 8860
    A two component acrylic polyurethane finish giving excellent durability and long term recoatability.
    1. 1

    Sorry, we couldn't find any results
    Fetching the data, please wait...