Offshore Oil and Gas

Product Applications

We offer a complete coating solution range for the most demanding offshore environments around the world.

Filter by

Products

182 Product Found
My Filters
    Primer-Finish
    Intercure 3240G
    A two component, gloss, low VOC, high solids, fast drying polyaspartic primer/finish coating. Intercure 3240G provides improved productivity at ambient temperature application whilst combining the anti-corrosive performance of epoxy coatings and high aesthetics of UV durable topcoats in a single coat application. Intercure 3240G is applied as a single coat direct to correctly prepared substrates using manual mix (single leg) or automatic mix (plural leg) application equipment, reducing application time, energy consumption and labour costs when compared to two coat applications, or single coat applications which require force drying at high temperature.
    Passive Fire Protection
    Chartek 1960 CSP
    Chartek 1960CSP intumescent material combined hydrocarbon fire protection and insulation against cryogenic liquid exposure.
    Lining
    Interline 1046
    A two component, chemically resistant, high solids, high build epoxy phenolic tank lining providing static dissipation properties.
    Passive Fire Protection
    Interchar 1160
    Interchar 1160 is a single component waterborne intumescent coating designed for onsite application. With zero VOC, Interchar 1160 offers a more environmentally friendly option for protection of structural steelwork, especially where aesthetics are important. Interchar 1160 is independently tested for up to 60 min fire in internal environments.
    Lining
    Enviroline 376F-30LT
    Low Temperature Application and Cure Tank Lining.
    Primer
    Ceilcote 680 Primer
    Ceilcote 680 Primer is a low viscosity epoxy primer for steel and concrete, with low temperature cure and a degree of tolerance to surface moisture.
    Passive Fire Protection
    Interchar 1120HY
    A single component, borate and chlorine free, water borne intumescent coating designed for on-site application to interior exposed structural steel requiring protection from cellulosic fire. Interchar 1120HY is a low VOC acrylic intumescent material independently fire tested for up to 3 hour fire ratings in accordance with ASTM E119/UL263.
    Primer
    Interzone 1020
    A two component, glass flake reinforced ambient cure isophthalic polyester coating.
    Primer
    Interplate 837HS
    A two pack heat resistant ceramic zinc silicate anti-corrosive primer. Suitable for controlled cathodic protection.
    Other
    Interplus 4102 Odin Gel
    A single component, water-based rust remover / cleaner gel. Interplus 4102 Odin Gel is 100% biologically degradable, free for toxins and conforms to the yellow classification of the Harmonised Offshore Chemical Notification Format (HOCNF).
    Intermediate
    Intergard 2005
    A two component high build epoxy semi gloss finish.
    Chemical Resistant Lining
    Ceilcote 242HT Flakeline
    Ceilcote 242HT Flakeline is a glass flake filled, catalyzed vinyl ester system with excellent resistance to organic and inorganic acid solutions and many aliphatic solvents.
    Surface Pre-Treatment
    Interplus 546
    A single component solvent based cleaner/degreaser, which can be described as readily biodegradable as tested by OECD 301B CO2 Evolution test.
    Temporary Protection
    Intertherm 79
    A single component, fast drying primer based on a specially modified synthetic resin. On heating the coating will decompose to leave an inert residue, with minimal evaporation of organic condensation products.
    Lining
    Enviroline 399PTFE
    Enviroline 399PTFE is a high solids, thick-film single coat advanced hybrid epoxy system that reduces the coefficient of friction to allow smoother, easier loading of slurry and dry products.
    Fetching the data, please wait...