BACK TO PRODUCTS

Offshore Oil and Gas

Product Applications

We offer a complete coating solution range for the most demanding offshore environments around the world.

CASES

Fireproofing an offshore giant

Filter by

Products

184 Product Found
My Filters
    Temperature Resistance
    Intertherm 50
    A single component, high temperature coating based on a moisture-curing silicone binder, Intertherm 50 is ideal for the protection of steel from corrosion at temperatures up to 540°C (1004°F). The moisture-curing crosslinking technology of Intertherm 50 allows multiple coats to be applied without heat curing.
    Intermediate
    Intergard 475HS
    Intergard 475HS is a low VOC, high solids, high build epoxy used to improve barrier protection for a range of anticorrosive coating systems in a wide range of aggressive environments. Intergard 475HS can be pigmented with MIO to provide improved overcoating properties, better facilitating application in the fabrication shop.
    Lining
    Interline 955
    A two component, heavy duty vinyl ester coating reinforced with glass flake to increase chemical and abrasion resistance.A chemically resistant, vinyl ester coating which can be applied using standard airless spray equipment at material temperatures up to 35°C (95°F).
    Temperature Resistance
    Intertherm 228HS
    A highly crosslinked, two component, high build epoxy phenolic coating, Intertherm 228HS combines properties of corrosion and chemical resistance when used in high temperature service. Based upon novolac resin technology, Intertherm 228HS can be used in a wide range of highly corrosive environments operating at temperatures up to 230°C (446°F).
    Finish
    Devthane 379N
    A low VOC, two component modified acrylic polyurethane finish giving excellent durability and long-term
    recoatability, for use over correctly prepared primed surfaces. This product is also HAPS free and
    exempt solvent free.
    Primer
    Intergard 291
    A two component epoxy anti-corrosive primer.
    Surface Tolerant
    Interbond 998PB
    A solvent free, two component, high build, surface tolerant epoxy coating capable of being applied as a single or multi-coat system over abrasive blasted, hydroblasted or mechanically prepared steel surfaces.
    Finish
    Devcryl 1449
    A single component water borne finish formulated on weather resistant acrylic copolymer technology. *Please note this product is only available in North America.
    Primer-Finish
    Intergard 345
    Intergard 345 is a versatile, low VOC, high solids, zinc phosphate direct-to-metal epoxy. Suitable for use as a one or two coat new construction primer-finish coating or as an intermediate over recommended anticorrosive primers. Intergard 345 offers excellent anticorrosive performance with rapid drying time and excellent early abrasion resistance resulting in high steel throughput and increased productivity.
    Primer
    Interzinc 52
    Containing 80% zinc, Interzinc 52 is a high performance two component zinc-rich epoxy primer with excellent application properties. Interzinc 52 complies with SSPC Paint 20 Level 2 and has been designed to provide maximum protection as part of an anticorrosive coating system for steel in aggressive environments in both maintenance and new construction situations
    Lining
    Enviroline 2405
    An ultra high solids, two component polycyclamine cured lining system utilising advanced epoxy technology, designed for single-leg application.
    Primer
    Intergard 251
    The fast drying and handling properties of Intergard 251 coupled with extended overcoatability make this an excellent primer for factory application prior to full system application on site. Intergard 251 is a two component anticorrosive zinc phosphate epoxy primer for use in both new construction and industrial maintenance for a wide range of anti-corrosive coatings systems.
    Lining
    Interline 982
    A two component epoxy holding primer.
    Primer
    Interprime 539
    A single component modified polyvinyl butyral, phosphoric acid etch primer free from zinc chromate.
    Finish
    Interthane 990V
    A low VOC, two component modified acrylic polyurethane finish giving excellent durability and long-term recoatability, for use over correctly prepared primed surfaces. This product is also HAPS free and exempt solvent free.International Paint also offers Interthane 990V in a mildew resistant, bright white finish. Contact your International Paint representative for additional information.
    1. 1

    Sorry, we couldn't find any results
    Fetching the data, please wait...