BACK TO PRODUCTS

Offshore Oil and Gas

Product Applications

We offer a complete coating solution range for the most demanding offshore environments around the world.

CASES

Fireproofing an offshore giant

Filter by

Products

185 Product Found
My Filters
    Intermediate
    Intercure 420HS
    A two component, high solids, low VOC epoxy micaceous iron oxide intermediate coating offering excellent barrier protection, low temperature cure and rapid overcoating properties.
    Primer
    Interdur 8805
    A two component, rapid recoat, fast curing solvent based inorganic zinc rich ethyl silicate primer. Conforms to SSPC Paint 20 Level 3. Available in ASTM D520, Type II zinc dust version as standard.
    Passive Fire Protection
    Chartek 8E
    Boron-free Chartek 8E provides exceptional pool fire performance with up to 30% lower installed weight compared to alternative PFP products, allowing for greater flexibility in structural design. It improves coating efficiency through reduced number of coats and no mesh requirement for up to 60 minutes pool fire duration.
    Other
    Interplus 4102 Odin Gel
    A single component, water-based rust remover / cleaner gel. Interplus 4102 Odin Gel is 100% biologically degradable, free for toxins and conforms to the yellow classification of the Harmonised Offshore Chemical Notification Format (HOCNF).
    Intermediate
    Intergard 2005
    A two component high build epoxy semi gloss finish.
    Finish
    Interfine 2700
    Direct-to-Metal epoxy polysiloxane finish
    Primer-Finish
    Interthane 3230SG
    A two component, semi- gloss, low VOC, high solids, fast curing, polyurethane primer/finish pigmented with zinc phosphate to provide added anti-corrosive performance and a durable, decorative finish.
    Surface Pre-Treatment
    Interplus 4101
    A single component, water-based rust remover / cleaner gel. Clean Gel is 100% biologically degradable, free for toxins and conforms to the yellow classification of the Harmonised Offshore Chemical Notification Format (HOCNF).
    Reference
    Ceilcote 165 Grout
    Ceilcote 165 Grout is a carefully blended, three component vinylester grout. It is designed for grouting pumps, vessels and equipment that are subjected to chemical exposure.
    Primer
    Interzinc 125
    Interzinc 125 is a self curing ethyl silicate based zinc rich coating with the zinc powder incorporated into the liquid component to give a single pack product.This product complies with the composition and performance requirements of SSPC Paint 20 and is characterised by excellent anticorrosive properties and easy application.
    Lining
    Ceilcote 64 Lining
    CEILCOTE 64 Lining is a heavy-duty lining that protects steel and concrete in immersion service from strong chemicals. The lining is formulated from polyester resin, inert fillers, and fiberglass reinforcement. It can withstand solution temperatures to 160°F (71°C) in immersion service.
    Primer-Finish
    Interseal 738
    A two component, low VOC, high solids epoxy, pigmented with aluminium to provide enhanced corrosion resistance.
    Temperature Resistance
    Intertherm 715
    A functional coating for identification of hot spots and internal insulation failures, Intertherm 715 exhibits a visual color change in response to temperature rise. Based upon modified silicone technology, Intertherm 715 is a single component coating ideal for use on reaction vessels on chemical and petrochemical sites as a warning of dangerous temperature increases.
    Surface Pre-Treatment
    Interplus 546
    A single component solvent based cleaner/degreaser, which can be described as readily biodegradable as tested by OECD 301B CO2 Evolution test.
    Primer
    Intergard 242
    A general purpose, two component epoxy anti-corrosive primer pigmented with zinc phosphate to comply with BS5493:1977.
    1. 1

    Sorry, we couldn't find any results
    Fetching the data, please wait...