BACK TO PRODUCTS

Onshore Oil and Gas Facilities

Product Applications

Our extensive product range is designed to increase service life and minimize unplanned shutdowns.

CASES

Overcoming coating challenges

Filter by

Products

370 Product Found
My Filters
    Primer
    Intergard 2511
    A two component, low VOC, high solids, epoxy primer containing zinc phosphate anti-corrosive pigmentation.This primer's versatile application properties provide robust film thickness control as supplied, without the need to thin.
    Primer
    Intergard 214
    A two component epoxy sealer coat pigmented with aluminium flake.
    Other
    Intercrete 4816
    Finish
    Interthane 870UHS
    A low VOC, high build, semi-gloss urethane finish with excellent gloss and colour retention on exterior exposure, for use over correctly prepared and primed surfaces.The VOC is below 250 g/l to conform to local VOC regulations.
    Intermediate
    Interdur 8840
    A low VOC, high solids, high build, two component epoxy coating. Available with conventional pigmentation, or alternatively can be pigmented with micaceous iron oxide to provide enhanced overcoating properties. CHINA ONLY
    Finish
    Devlac 1432
    A quick dry, corrosion resistant gloss enamel specially formulated for finishing metal products. *Please note this product is only available in North America.
    Structural Concrete- Repair and Protection
    Intercrete 4822 (formerly Monolevel FC)
    A single component, water-based (VOC-free), polymer modified, fibre reinforced cementitious repair mortar with high adhesive properties, allowing it to be used as a thin screed or filler to provide a fair-faced finish. It cures to provide enhanced freeze/thaw resistance and protection from the ingress of water, acid gases and chlorides. It is supplied as a single component system requiring only the addition of clean water.
    Passive Fire Protection
    Chartek 8823
    Chartek 8823 is a high performance, patented, boron free, modified epoxy intumescent fire protection solution.
    Temporary Protection
    Intertherm 79
    A single component, fast drying primer based on a specially modified synthetic resin. On heating the coating will decompose to leave an inert residue, with minimal evaporation of organic condensation products.
    Preconstruction Primer
    Interdur 8812
    Interdur 8812 is a fast drying, two component, weldable zinc silicate pre-fabrication primer for application by manual or automatic spray. CHINA ONLY
    Surface Pre-Treatment
    Interplus 4103
    A single component, water-based rust remover / cleaner concentrated fluid. Clean Cons is 100% biologically degradable, free from toxins and conforms to the yellow classification of the Harmonised Offshore Chemical Notification Format (HOCNF).
    Passive Fire Protection
    Intertherm 7050
    Intertherm 7050 is a high performance, durable solvent-free epoxy for use in hot or cold conditions, where long term corrosion protection and thermal insulation are required. Low installed weight and excellent damage and impact resistance make Intertherm 7050 ideal for offsite module fabrication. Duplex systems with Chartek provide both fire and cryogenic spill protection.
    Primer
    Interlac 393
    A rust inhibitive primer for use over properly prepared steel. A general purpose shop primer, Interlac 393 offers low cost, easy application and low VOC.
    Surface Tolerant
    Interplus 880
    A low VOC, two component high solids flexible aliphatic surface tolerant polyurethane primer, intermediate or finish capable of producing high build films.
    Preconstruction Primer
    Interplate 398
    A two component, fast drying modified epoxy phosphate prefabrication primer for manual or automatic spray application.
    1. 1

    Sorry, we couldn't find any results
    Fetching the data, please wait...