Onshore Oil and Gas Facilities

Product Applications

Our extensive product range is designed to increase service life and minimize unplanned shutdowns.

Filter by

Products

365 Product Found
My Filters
    Lining
    Interline 961
    A two component, solvent based epoxy phenolic tank lining for application to both new steel, or lightly pitted surfaces.
    Primer
    Intergard 436
    A two component clear epoxy sealer.Can be applied to slightly damp concrete. Cures quickly, long pot life. Excellent resistance to most alkalis, solvents, mild acids and water. Good toughness and resilience. Excellent binding properties to weathered fibrous cement sheeting.
    Subsea, Abrasion Resistant and Splashzone
    Interzone 762
    A two component, styrene free, glass flake reinforced ambient cure polyester/acrylic copolymer coating.
    Primer
    Intergard 2511
    A two component, low VOC, high solids, epoxy primer containing zinc phosphate anti-corrosive pigmentation.This primer's versatile application properties provide robust film thickness control as supplied, without the need to thin.
    Chemical Resistant Lining
    Ceilcote 140 Flakeline
    Ceilcote 140 Flakeline is a heavy duty, glass flake reinforced, chemically resistant vinyl ester lining for protection of steel against aggressive chemicals in immersion service.
    Surface Pre-Treatment
    Interplus 614
    A single component, water based rust remover gel, which can be described as readily biodegradable as tested by OECD 301B CO2 Evolution test.
    Finish
    Interthane1022
    A two component acrylic polyurethane finish giving excellent durability and long term recoatability
    Concrete Repair
    Intergard 2002
    A two-component, high solids and high build polyamine-cured epoxy.
    Other
    Enviroline 405HTR MR System
    Enviroline 405HTR MR is a reinforced chemcial resistant system. The system features a high temperature reesistant, 100% volume high solids, two component polycyclamine cured lining topcoat. Fibre glass mat reinforcement increases physical properties and where necessary allows dynamic crack bridging in concrete.In the table below you can find System Sheet and Application guidelines. For Technical Datasheets and MSDSs please click on the links to the individual component products of the system below the table.
    Lining
    Interline 859
    A two component, chemically resistant, high solids, high build epoxy phenolic tank lining providing static dissipation properties.
    Lining
    Interline 1046
    A two component, chemically resistant, high solids, high build epoxy phenolic tank lining providing static dissipation properties.
    Passive Fire Protection
    Interchar 1160
    Interchar 1160 is a single component waterborne intumescent coating designed for onsite application. With zero VOC, Interchar 1160 offers a more environmentally friendly option for protection of structural steelwork, especially where aesthetics are important. Interchar 1160 is independently tested for up to 60 min fire in internal environments.
    Finish
    Intercryl 988
    Single pack pure acrylic membrane coating designed to provide high quality cosmetic appearance with protection. It is also the preferred coating for sprayed polyurethane foam and is a long life finish coat over Intergard 436 on fibre cement roofing. Intercryl 988 has high volume solids, exhibits long term resistance to UV and atmospheric pollution and remains permanently flexible and elastic.
    Primer-Finish
    Intercryl 525
    A VOC compliant, single component, water based anti-corrosive primer/finish based on weather resistant acrylic copolymer technology.
    Primer
    Interprime 484
    Interprime 484 is an air drying Zinc Phosphate Primer designed for application to all types of steel surfaces.This primer is characterised by good anti-corrosive properties, easy application and the ability to protect hand cleaned steel.
    Fetching the data, please wait...