Onshore Oil and Gas Facilities

Product Applications

Our extensive product range is designed to increase service life and minimize unplanned shutdowns.

Filter by

Products

368 Product Found
My Filters
    Primer
    Interdur 8805
    A two component, rapid recoat, fast curing solvent based inorganic zinc rich ethyl silicate primer. Conforms to SSPC Paint 20 Level 3. Available in ASTM D520, Type II zinc dust version as standard.
    Primer
    Intergard 2511
    A two component, low VOC, high solids, epoxy primer containing zinc phosphate anti-corrosive pigmentation.This primer's versatile application properties provide robust film thickness control as supplied, without the need to thin.
    Concrete Repair
    Intergard 2002
    A two-component, high solids and high build polyamine-cured epoxy.
    Intermediate
    Interdur 8842
    A two component, high solids, low VOC epoxy micaceous iron oxide coating formulated on proprietary polymer technology which provides rapid cure and overcoating even under low temperature conditions.
    Other
    Enviroline 405HTR MR System
    Enviroline 405HTR MR is a reinforced chemcial resistant system. The system features a high temperature reesistant, 100% volume high solids, two component polycyclamine cured lining topcoat. Fibre glass mat reinforcement increases physical properties and where necessary allows dynamic crack bridging in concrete.In the table below you can find System Sheet and Application guidelines. For Technical Datasheets and MSDSs please click on the links to the individual component products of the system below the table.
    Structural Concrete- Repair and Protection
    Intercrete 4881 (formerly Biodex Sheen Series 2)
    A single component, water-based (VOC-free), elastomeric, high build hygiene coating for walls and ceilings in demanding service conditions. Intercrete 4881 is a resin-ric, semi-gloss, biostatic membrane that incorporates the latest encapsulated protectant technology in combination with silver ions to give completely safe use and zero leaching into the surrounding environment. It effectively prevents the growth of mould and bacteria whilst proven silver ion technology has recognised benefits in limiting the spread of germs. The unique in-film chemistry allows for the ultra-slow, controlled release of active ingredients into the coating film throughout a long service life, even where harsh cleaning regimes are followed.
    Passive Fire Protection
    Chartek 8E
    Boron-free Chartek 8E provides exceptional pool fire performance with up to 30% lower installed weight compared to alternative PFP products, allowing for greater flexibility in structural design. It improves coating efficiency through reduced number of coats and no mesh requirement for up to 60 minutes pool fire duration.
    Primer
    Interdur 8802
    A two component epoxy zinc phosphate/micaceous iron oxide primer, formulated on proprietary polymer technology, which provides rapid cure and overcoating even under low temperature conditions. A high solids, low VOC product. CHINA ONLY
    Finish
    Intercryl 988
    Single pack pure acrylic membrane coating designed to provide high quality cosmetic appearance with protection. It is also the preferred coating for sprayed polyurethane foam and is a long life finish coat over Intergard 436 on fibre cement roofing. Intercryl 988 has high volume solids, exhibits long term resistance to UV and atmospheric pollution and remains permanently flexible and elastic.
    Passive Fire Protection
    Chartek 7E
    A self-reinforced epoxy coating, Chartek 7E simplifies application giving the oil and gas industry more choice and greater efficiency than ever before. Chartek 7E offers outstanding pool and jet fire resistance for up to two hours and a significant reduction in installed weight against other PFP products in the market.
    Other
    Interline 399C
    Conductive, high temperature resistant, epoxy novolac tank lining approved to Chinese GB50393 Standard. Light coloured and does not contain graphite.
    Other
    Intercrete 4816
    Primer
    Interzone 1020
    A two component, glass flake reinforced ambient cure isophthalic polyester coating.
    Temperature Resistance
    Intertherm 3350
    A single component, spray applied insulation coating based upon waterborne acrylic technology, Intertherm 3350 is suitable for use on substrates operating up to 177°C (350°F). Combining superior thin film insulation performance with easy application, Intertherm 3350 can improve productivity and minimize energy loss. Where suitable, Intertherm 3350 provides a seamless adherent insulating film enabling the removal of equipment from a corrosion under insulation (CUI) inspection program and mitigating a facility's overall CUI exposure.
    Primer
    Interdur 8800
    A two component, low VOC, high solids, fast curing anticorrosive epoxy primer pigmented with zinc phosphate. CHINA ONLY
    Fetching the data, please wait...