Primer
Intergard 214
A two component epoxy sealer coat pigmented with aluminium flake.
BACK TO PRODUCTS
Onshore Oil and Gas Facilities
Product Applications
Our extensive product range is designed to increase service life and minimize unplanned shutdowns.
Filter by
Products
My Filters
Passive Fire Protection
Chartek 8823
Chartek 8823 is a high performance, patented, boron free, modified epoxy intumescent fire protection solution.
Preconstruction Primer
Interdur 8812
Interdur 8812 is a fast drying, two component, weldable zinc silicate pre-fabrication primer for application by manual or automatic spray. CHINA ONLY
Intermediate
Intercure 420HS
A two component, high solids, low VOC epoxy micaceous iron oxide intermediate coating offering excellent barrier protection, low temperature cure and rapid overcoating properties.
Primer
Interdur 8805
A two component, rapid recoat, fast curing solvent based inorganic zinc rich ethyl silicate primer. Conforms to SSPC Paint 20 Level 3. Available in ASTM D520, Type II zinc dust version as standard.
Other
Enviroline 405HTR MR System
Enviroline 405HTR MR is a reinforced chemcial resistant system. The system features a high temperature reesistant, 100% volume high solids, two component polycyclamine cured lining topcoat. Fibre glass mat reinforcement increases physical properties and where necessary allows dynamic crack bridging in concrete.In the table below you can find System Sheet and Application guidelines. For Technical Datasheets and MSDSs please click on the links to the individual component products of the system below the table.
Passive Fire Protection
Chartek 8E
Boron-free Chartek 8E provides exceptional pool fire performance with up to 30% lower installed weight compared to alternative PFP products, allowing for greater flexibility in structural design. It improves coating efficiency through reduced number of coats and no mesh requirement for up to 60 minutes pool fire duration.
Primer
Interdur 8802
A two component epoxy zinc phosphate/micaceous iron oxide primer, formulated on proprietary polymer technology, which provides rapid cure and overcoating even under low temperature conditions. A high solids, low VOC product. CHINA ONLY
Finish
Intercryl 988
Single pack pure acrylic membrane coating designed to provide high quality cosmetic appearance with protection. It is also the preferred coating for sprayed polyurethane foam and is a long life finish coat over Intergard 436 on fibre cement roofing. Intercryl 988 has high volume solids, exhibits long term resistance to UV and atmospheric pollution and remains permanently flexible and elastic.
Other
Interline 399C
Conductive, high temperature resistant, epoxy novolac tank lining approved to Chinese GB50393 Standard. Light coloured and does not contain graphite.
Structural Concrete- Repair and Protection
Intercrete 4894
A single component, low VOC, waterborne, translucent coating that offers an excellent defence against carbon dioxide ingress and the effects of weathering, significantly prolonging the maintenance free life of buildings and structures. Applied over a complementary pigmented Intercrete base coat system, it forms a translucent reflective metallic satin finish to create a feature appearance. It prevents water ingress, yet allows damp substrates to breathe and dry out, and is both dirt and UV resistant. Protection from the growth of mould and fungi is assured with the use of advanced encapsulated biocide technology to help maintain its appearance.
Other
Interline 955 MR System
Interline 995 MR Flakeline is a reinforced chemical resistant system. The system features a glass flake filled novolac vinyl ester topcoat for long-term chemical and heat resistance and fibre glass mat reinforcement to increase physical properties and where necessary bridge dynamic cracks in concrete.
In the table below you can find System Sheet and Application guidelines. For Technical Datasheets and MSDSs please click on the links to the individual component products of the system below the table.
In the table below you can find System Sheet and Application guidelines. For Technical Datasheets and MSDSs please click on the links to the individual component products of the system below the table.