Finish
Devcryl 1449
A single component water borne finish formulated on weather resistant acrylic copolymer technology. *Please note this product is only available in North America.
BACK TO PRODUCTS
Thermal Power
Product Applications
We offer a wide range of high performance coatings that provide long term corrosion protection and aesthetics
Filter by
Products
My Filters
Primer
Interdur 8805
A two component, rapid recoat, fast curing solvent based inorganic zinc rich ethyl silicate primer. Conforms to SSPC Paint 20 Level 3. Available in ASTM D520, Type II zinc dust version as standard.
Structural Concrete- Repair and Protection
Intercrete 4804 (formerly Marine Mortar S)
A two component, water-based (VOC-free), fibre reinforced, polymer modified, cementitious mortar with excellent adhesion for use in areas subject to early immersion. Intercrete 4804 cures rapidly to produce a high strength mortar with enhanced polymeric properties for the repair of voids in aggressive marine environments. Suitable for thicknesses up to 50mm.
Temperature Resistance
Intertherm 228HS
A highly crosslinked, two component, high build epoxy phenolic coating, Intertherm 228HS combines properties of corrosion and chemical resistance when used in high temperature service. Based upon novolac resin technology, Intertherm 228HS can be used in a wide range of highly corrosive environments operating at temperatures up to 230°C (446°F).
Structural Concrete- Repair and Protection
Intercrete 4874 (formerly Cemprotec 2000-BJT)
A high performance butyl tape which is designed to join two pieces of Intercrete 4872 waterproof composite tape together. Embedded into our Intercrete range of cementitious coatings, it forms an elastomeric joint between two lengths of tape to accommodate movement.
Other
Enviroline 405HTR MR System
Enviroline 405HTR MR is a reinforced chemcial resistant system. The system features a high temperature reesistant, 100% volume high solids, two component polycyclamine cured lining topcoat. Fibre glass mat reinforcement increases physical properties and where necessary allows dynamic crack bridging in concrete.In the table below you can find System Sheet and Application guidelines. For Technical Datasheets and MSDSs please click on the links to the individual component products of the system below the table.
Primer-Finish
Intercure 3240G
A two component, gloss, low VOC, high solids, fast drying polyaspartic primer/finish coating. Intercure 3240G provides improved productivity at ambient temperature application whilst combining the anti-corrosive performance of epoxy coatings and high aesthetics of UV durable topcoats in a single coat application. Intercure 3240G is applied as a single coat direct to correctly prepared substrates using manual mix (single leg) or automatic mix (plural leg) application equipment, reducing application time, energy consumption and labour costs when compared to two coat applications, or single coat applications which require force drying at high temperature.
Structural Concrete- Repair and Protection
Intercrete 4811 (formerly Bond-Prime)
A single component, water-based (VOC free), rapid curing, acrylic copolymer modified with a unique water-emulsified epoxy cross-linking agent. Intercrete 4811 is inherently hydrophobic and alkali resistant, making it ideal for application to a wide range of new and aged mineral substrates.
It is non-hazardous, and application is by brush, roller or airless spray to prime and stabilise surfaces prior to the application of Flexcrete’s specialist membranes. Intercrete 4811 cures to form a clear film with an identifying green tint, both on and within the substrate, to provide an ideal surface for subsequent treatment.
It is non-hazardous, and application is by brush, roller or airless spray to prime and stabilise surfaces prior to the application of Flexcrete’s specialist membranes. Intercrete 4811 cures to form a clear film with an identifying green tint, both on and within the substrate, to provide an ideal surface for subsequent treatment.
Finish
Devthane 379N
A low VOC, two component modified acrylic polyurethane finish giving excellent durability and long-term
recoatability, for use over correctly prepared primed surfaces. This product is also HAPS free and
exempt solvent free.
recoatability, for use over correctly prepared primed surfaces. This product is also HAPS free and
exempt solvent free.
Lining
Enviroline 405HTR
Enviroline 405HTR offers high temperature performance alongside a wide ranging chemical resistance, for increased operational flexibility. Formulated with innovative polycyclamine technology, Enviroline 405HTR is a low VOC novolac epoxy lining that allows rapid return to service in just 14 hours, minimizing process disruption and reducing overall installation costs. Enviroline 405HTR offers high temperature resistance to 150°C (302°F) in a variety of cargoes including crude oil and produced water.
Primer-Finish
Intercryl 525
A VOC compliant, single component, water based anti-corrosive primer/finish based on weather resistant acrylic copolymer technology.
Structural Concrete- Repair and Protection
Intercrete 4807 (formerly Ttiefill)
A single component, water-based (VOC free), polymer modified, fibre reinforced, Portland cement based repair compound which exhibits unique hydraulic properties to produce a rapid setting curing mortar with enhanced polymer properties.
Intercrete 4807 is ideally suited for the filling of voids, particularly in new construction, which needs to be rapidly put into service, such as tieholes, grout holes and voids around fixings.
Intercrete 4807 is ideally suited for the filling of voids, particularly in new construction, which needs to be rapidly put into service, such as tieholes, grout holes and voids around fixings.
Structural Concrete- Repair and Protection
Intercrete 4805 (formerly Monopour)
A single component, water-based (VOC free), high performance, polymer modified, non-shrink cementitious formulation. Intercrete 4805 is a flowing grout with a maximum aggregate size of 2.5mm for application thicknesses up to 100mm.
Finish
Interthane 990V
A low VOC, two component modified acrylic polyurethane finish giving excellent durability and long-term recoatability, for use over correctly prepared primed surfaces. This product is also HAPS free and exempt solvent free.International Paint also offers Interthane 990V in a mildew resistant, bright white finish. Contact your International Paint representative for additional information.