Lining
Interline 975P
A two component, solvent free, heavy duty epoxy tank lining.
BACK TO PRODUCTS
Thermal Power
Product Applications
We offer a wide range of high performance coatings that provide long term corrosion protection and aesthetics
Filter by
Products
My Filters
Primer
Interdur 8805
A two component, rapid recoat, fast curing solvent based inorganic zinc rich ethyl silicate primer. Conforms to SSPC Paint 20 Level 3. Available in ASTM D520, Type II zinc dust version as standard.
Other
Enviroline 405HTR MR System
Enviroline 405HTR MR is a reinforced chemcial resistant system. The system features a high temperature reesistant, 100% volume high solids, two component polycyclamine cured lining topcoat. Fibre glass mat reinforcement increases physical properties and where necessary allows dynamic crack bridging in concrete.In the table below you can find System Sheet and Application guidelines. For Technical Datasheets and MSDSs please click on the links to the individual component products of the system below the table.
Primer
Interzone 1020
A two component, glass flake reinforced ambient cure isophthalic polyester coating.
Other
Interplus 4102 Odin Gel
A single component, water-based rust remover / cleaner gel. Interplus 4102 Odin Gel is 100% biologically degradable, free for toxins and conforms to the yellow classification of the Harmonised Offshore Chemical Notification Format (HOCNF).
Primer
Interdur 8800
A two component, low VOC, high solids, fast curing anticorrosive epoxy primer pigmented with zinc phosphate. CHINA ONLY
Primer
Interdur 8809
Interdur 8809 is a two component, metallic zinc rich epoxy primer which complies with the composition and performance requirements of HG/T3668. CHINA ONLY
Other
Interline 955 MR System
Interline 995 MR Flakeline is a reinforced chemical resistant system. The system features a glass flake filled novolac vinyl ester topcoat for long-term chemical and heat resistance and fibre glass mat reinforcement to increase physical properties and where necessary bridge dynamic cracks in concrete.
In the table below you can find System Sheet and Application guidelines. For Technical Datasheets and MSDSs please click on the links to the individual component products of the system below the table.
In the table below you can find System Sheet and Application guidelines. For Technical Datasheets and MSDSs please click on the links to the individual component products of the system below the table.
Structural Concrete- Repair and Protection
Intercrete 4822 (formerly Monolevel FC)
A single component, water-based (VOC-free), polymer modified, fibre reinforced cementitious repair mortar with high adhesive properties, allowing it to be used as a thin screed or filler to provide a fair-faced finish. It cures to provide enhanced freeze/thaw resistance and protection from the ingress of water, acid gases and chlorides. It is supplied as a single component system requiring only the addition of clean water.
Temperature Resistance
Intertherm 2205
Intertherm 2205 is a specialist temperature resistant maintenance coating, designed to resist corrosion under insulation (CUI) and high temperatures up to 230°C (446°F). Based on innovative, hot spread epoxy technology Intertherm 2205 shows excellent application characteristics and can be brush applied to hand prepared, hot steel up to 205°C (401°F).
Primer
Intergard 7500
A two component, high volume solids, abrasion resistant pure epoxy coating pigmented with aluminium that provides excellent long term anti-corrosive protection. Intergard 7500 is capable of fast cure and has low temperature cure properties. Ideally suited for use as a universal primer in protecting underwater areas, splashzones, decks and structural steel.
Structural Concrete- Repair and Protection
Intercrete 4813 (formerly Metal-Prime WB)
A single component, water-based (VOC free), epoxy and acrylic-based anti-corrosion primer. Intercrete 4813 is a phosphate free formulation which forms a distinctive oxide red film upon application, ensuring even coverage of the substrate.
Extremely effective at preventing flash rusting and rust creep around holidays or areas of damage.
Extremely effective at preventing flash rusting and rust creep around holidays or areas of damage.
Other
Interline 984 MR System
Interline 984 MR is a reinforced chemcial resistant system. The system features a 100% volume high solids, two componentepoxy phenolic topcoat. Fibre glass mat reinforcement increases physical properties and where necessary allows dynamic crack bridging in concrete.In the table below you can find System Sheet and Application guidelines. For Technical Datasheets and MSDSs please click on the links to the individual component products of the system below the table.