Lining
Interline 975P
A two component, solvent free, heavy duty epoxy tank lining.
BACK TO PRODUCTS
Thermal Power
Product Applications
We offer a wide range of high performance coatings that provide long term corrosion protection and aesthetics
Filter by
Products
My Filters
Finish
Interthane 990FD
A two component fast dry acrylic polyurethane finish giving excellent durability and long term recoatability. Interthane 990FD is a regional product, supported in North America.
Finish
Interthane 870UHS
A low VOC, high build, semi-gloss urethane finish with excellent gloss and colour retention on exterior exposure, for use over correctly prepared and primed surfaces.The VOC is below 250 g/l to conform to local VOC regulations.
Intermediate
Interdur 8840
A low VOC, high solids, high build, two component epoxy coating. Available with conventional pigmentation, or alternatively can be pigmented with micaceous iron oxide to provide enhanced overcoating properties. CHINA ONLY
Structural Concrete- Repair and Protection
Intercrete 4822 (formerly Monolevel FC)
A single component, water-based (VOC-free), polymer modified, fibre reinforced cementitious repair mortar with high adhesive properties, allowing it to be used as a thin screed or filler to provide a fair-faced finish. It cures to provide enhanced freeze/thaw resistance and protection from the ingress of water, acid gases and chlorides. It is supplied as a single component system requiring only the addition of clean water.
Passive Fire Protection
Chartek 8823
Chartek 8823 is a high performance, patented, boron free, modified epoxy intumescent fire protection solution.
Temporary Protection
Intertherm 79
A single component, fast drying primer based on a specially modified synthetic resin. On heating the coating will decompose to leave an inert residue, with minimal evaporation of organic condensation products.
Primer
Interlac 393
A rust inhibitive primer for use over properly prepared steel. A general purpose shop primer, Interlac 393 offers low cost, easy application and low VOC.
Surface Tolerant
Interplus 880
A low VOC, two component high solids flexible aliphatic surface tolerant polyurethane primer, intermediate or finish capable of producing high build films.
Preconstruction Primer
Interplate 398
A two component, fast drying modified epoxy phosphate prefabrication primer for manual or automatic spray application.
Structural Concrete- Repair and Protection
Intercrete 4803 (formerly Monolite)
A single component, water-based (VOC free), polymer modified, fibre reinforced, low density cementitious repair mortar. The thixotropic nature of the product enables easy high build hand and trowel application for the repair of voids and the rendering and re-profiling of vertical, horizontal and overhead surfaces.
Temperature Resistance
Intertherm 181
A two component, high temperature resistant topcoat based on inorganic silicate technology.
Intermediate
Intercure 420HS
A two component, high solids, low VOC epoxy micaceous iron oxide intermediate coating offering excellent barrier protection, low temperature cure and rapid overcoating properties.
Primer
Interdur 8805
A two component, rapid recoat, fast curing solvent based inorganic zinc rich ethyl silicate primer. Conforms to SSPC Paint 20 Level 3. Available in ASTM D520, Type II zinc dust version as standard.
Other
Enviroline 405HTR MR System
Enviroline 405HTR MR is a reinforced chemcial resistant system. The system features a high temperature reesistant, 100% volume high solids, two component polycyclamine cured lining topcoat. Fibre glass mat reinforcement increases physical properties and where necessary allows dynamic crack bridging in concrete.In the table below you can find System Sheet and Application guidelines. For Technical Datasheets and MSDSs please click on the links to the individual component products of the system below the table.