Transportation and Pipeline

Product Applications

Effective corrosion protection against some of the most aggressive chemicals, maximizing in-service time and profitability

Filter by

Products

217 Product Found
My Filters
    Lining
    Interline 961
    A two component, solvent based epoxy phenolic tank lining for application to both new steel, or lightly pitted surfaces.
    Concrete Repair
    Intergard 2002
    A two-component, high solids and high build polyamine-cured epoxy.
    Other
    Enviroline 405HTR MR System
    Enviroline 405HTR MR is a reinforced chemcial resistant system. The system features a high temperature reesistant, 100% volume high solids, two component polycyclamine cured lining topcoat. Fibre glass mat reinforcement increases physical properties and where necessary allows dynamic crack bridging in concrete.In the table below you can find System Sheet and Application guidelines. For Technical Datasheets and MSDSs please click on the links to the individual component products of the system below the table.
    Lining
    Devran 133
    A 100% solids, two-component epoxy coating for tank lining and repair of pitted steel surfaces. *Please note this product is only available in North America.
    Lining
    Interline 1046
    A two component, chemically resistant, high solids, high build epoxy phenolic tank lining providing static dissipation properties.
    Primer
    Interzinc 109
    A two component, metallic zinc rich epoxy primer formulated to provide fast drying, rapid handling properties and excellent abrasion resistance.
    Subsea, Abrasion Resistant and Splashzone
    Interzone 2000
    A very high solids, low VOC, two component ambient cure polyester containing a high level of chemically resistant glass flake which imparts properties of excellent corrosion, abrasion and chemical resistance.
    Other
    Interline 399C
    Conductive, high temperature resistant, epoxy novolac tank lining approved to Chinese GB50393 Standard. Light coloured and does not contain graphite.
    Lining
    Enviroline 376F-30LT
    Low Temperature Application and Cure Tank Lining.
    Finish
    Interthane 990UHS
    A low VOC, two component acrylic polyurethane high performance finish coat with excellent gloss and colour retention on exterior exposure, for use over correctly prepared primed surfaces.International Paint also offers Interthane 990UHS in a mildew resistant, bright white finish. Contact your International Paint representative for additional information.
    Passive Fire Protection
    Interchar 2060
    Interchar 2060 provides 60 minutes fire protection via single coat application while maintaining architectural aesthetics. It is a class leading single component, low VOC intumescent coating suitable for onsite and offsite application. Tested and certified to the highest standards, Interchar 2060 offers rapid drying times for fast handling and throughput.
    Primer-Finish
    Interthane 3230M
    A two component, matt, low VOC, high solids, fast curing, polyurethane primer/finish pigmented with zinc phosphate to provide added anti-corrosive performance and a durable, decorative finish.
    Primer
    Intergard 3210
    A two component, low VOC, high solids, fast curing epoxy primer for increased productivity pigmented with zinc phosphate to provide added anti-corrosive performance.
    Other
    Interline 955 MR System
    Interline 995 MR Flakeline is a reinforced chemical resistant system. The system features a glass flake filled novolac vinyl ester topcoat for long-term chemical and heat resistance and fibre glass mat reinforcement to increase physical properties and where necessary bridge dynamic cracks in concrete.
    In the table below you can find System Sheet and Application guidelines. For Technical Datasheets and MSDSs please click on the links to the individual component products of the system below the table.
    Finish
    Intergard 1735
    A high performance, low VOC, water borne two component epoxy with a high gloss finish.
    Fetching the data, please wait...