Finish
Devcryl 1449
A single component water borne finish formulated on weather resistant acrylic copolymer technology. *Please note this product is only available in North America.
BACK TO PRODUCTS
Transportation and Pipeline
Product Applications
Effective corrosion protection against some of the most aggressive chemicals, maximizing in-service time and profitability
Filter by
Products
My Filters
Structural Concrete- Repair and Protection
Intercrete 4804 (formerly Marine Mortar S)
A two component, water-based (VOC-free), fibre reinforced, polymer modified, cementitious mortar with excellent adhesion for use in areas subject to early immersion. Intercrete 4804 cures rapidly to produce a high strength mortar with enhanced polymeric properties for the repair of voids in aggressive marine environments. Suitable for thicknesses up to 50mm.
Temperature Resistance
Intertherm 228HS
A highly crosslinked, two component, high build epoxy phenolic coating, Intertherm 228HS combines properties of corrosion and chemical resistance when used in high temperature service. Based upon novolac resin technology, Intertherm 228HS can be used in a wide range of highly corrosive environments operating at temperatures up to 230°C (446°F).
Structural Concrete- Repair and Protection
Intercrete 4874 (formerly Cemprotec 2000-BJT)
A high performance butyl tape which is designed to join two pieces of Intercrete 4872 waterproof composite tape together. Embedded into our Intercrete range of cementitious coatings, it forms an elastomeric joint between two lengths of tape to accommodate movement.
Other
Enviroline 405HTR MR System
Enviroline 405HTR MR is a reinforced chemcial resistant system. The system features a high temperature reesistant, 100% volume high solids, two component polycyclamine cured lining topcoat. Fibre glass mat reinforcement increases physical properties and where necessary allows dynamic crack bridging in concrete.In the table below you can find System Sheet and Application guidelines. For Technical Datasheets and MSDSs please click on the links to the individual component products of the system below the table.
Structural Concrete- Repair and Protection
Intercrete 4811 (formerly Bond-Prime)
A single component, water-based (VOC free), rapid curing, acrylic copolymer modified with a unique water-emulsified epoxy cross-linking agent. Intercrete 4811 is inherently hydrophobic and alkali resistant, making it ideal for application to a wide range of new and aged mineral substrates.
It is non-hazardous, and application is by brush, roller or airless spray to prime and stabilise surfaces prior to the application of Flexcrete’s specialist membranes. Intercrete 4811 cures to form a clear film with an identifying green tint, both on and within the substrate, to provide an ideal surface for subsequent treatment.
It is non-hazardous, and application is by brush, roller or airless spray to prime and stabilise surfaces prior to the application of Flexcrete’s specialist membranes. Intercrete 4811 cures to form a clear film with an identifying green tint, both on and within the substrate, to provide an ideal surface for subsequent treatment.
Finish
Devthane 379N
A low VOC, two component modified acrylic polyurethane finish giving excellent durability and long-term
recoatability, for use over correctly prepared primed surfaces. This product is also HAPS free and
exempt solvent free.
recoatability, for use over correctly prepared primed surfaces. This product is also HAPS free and
exempt solvent free.
Lining
Enviroline 405HTR
Enviroline 405HTR offers high temperature performance alongside a wide ranging chemical resistance, for increased operational flexibility. Formulated with innovative polycyclamine technology, Enviroline 405HTR is a low VOC novolac epoxy lining that allows rapid return to service in just 14 hours, minimizing process disruption and reducing overall installation costs. Enviroline 405HTR offers high temperature resistance to 150°C (302°F) in a variety of cargoes including crude oil and produced water.
Lining
Enviroline 2405
An ultra high solids, two component polycyclamine cured lining system utilising advanced epoxy technology, designed for single-leg application.
Structural Concrete- Repair and Protection
Intercrete 4807 (formerly Ttiefill)
A single component, water-based (VOC free), polymer modified, fibre reinforced, Portland cement based repair compound which exhibits unique hydraulic properties to produce a rapid setting curing mortar with enhanced polymer properties.
Intercrete 4807 is ideally suited for the filling of voids, particularly in new construction, which needs to be rapidly put into service, such as tieholes, grout holes and voids around fixings.
Intercrete 4807 is ideally suited for the filling of voids, particularly in new construction, which needs to be rapidly put into service, such as tieholes, grout holes and voids around fixings.
Other
Interline 399C
Conductive, high temperature resistant, epoxy novolac tank lining approved to Chinese GB50393 Standard. Light coloured and does not contain graphite.
Structural Concrete- Repair and Protection
Intercrete 4805 (formerly Monopour)
A single component, water-based (VOC free), high performance, polymer modified, non-shrink cementitious formulation. Intercrete 4805 is a flowing grout with a maximum aggregate size of 2.5mm for application thicknesses up to 100mm.
Finish
Interthane 990V
A low VOC, two component modified acrylic polyurethane finish giving excellent durability and long-term recoatability, for use over correctly prepared primed surfaces. This product is also HAPS free and exempt solvent free.International Paint also offers Interthane 990V in a mildew resistant, bright white finish. Contact your International Paint representative for additional information.