Water and Waste

Product Applications

Long term corrosion protection to the steel and concrete used in the Water and Wastewater market.

Filter by

Products

212 Product Found
My Filters
    Lining
    Interline 961
    A two component, solvent based epoxy phenolic tank lining for application to both new steel, or lightly pitted surfaces.
    Lining
    Interline 955
    A two component, heavy duty vinyl ester coating reinforced with glass flake to increase chemical and abrasion resistance.A chemically resistant, vinyl ester coating which can be applied using standard airless spray equipment at material temperatures up to 35°C (95°F).
    Other
    Enviroline 405HTR MR System
    Enviroline 405HTR MR is a reinforced chemcial resistant system. The system features a high temperature reesistant, 100% volume high solids, two component polycyclamine cured lining topcoat. Fibre glass mat reinforcement increases physical properties and where necessary allows dynamic crack bridging in concrete.In the table below you can find System Sheet and Application guidelines. For Technical Datasheets and MSDSs please click on the links to the individual component products of the system below the table.
    Lining
    Devran 133
    A 100% solids, two-component epoxy coating for tank lining and repair of pitted steel surfaces. *Please note this product is only available in North America.
    Primer
    Ceilcote 680 Primer
    Ceilcote 680 Primer is a low viscosity epoxy primer for steel and concrete, with low temperature cure and a degree of tolerance to surface moisture.
    Primer
    Intercure 202
    A two component epoxy zinc phosphate/micaceous iron oxide primer, formulated on proprietary polymer technology, which provides rapid cure and overcoating even under low temperature conditions.A high solids, low VOC product.
    Passive Fire Protection
    Interchar 1120HY
    A single component, borate and chlorine free, water borne intumescent coating designed for on-site application to interior exposed structural steel requiring protection from cellulosic fire. Interchar 1120HY is a low VOC acrylic intumescent material independently fire tested for up to 3 hour fire ratings in accordance with ASTM E119/UL263.
    Primer-Finish
    Intercure 99NA
    Intercure 99NA polyaspartic technology is applied as a single coat at 150-250 microns (6-10 mils) direct-to-metal using standard application equipment, reducing application time and labour costs compared to two coat applications in moderately corrosive environments (up to C3, ISO 12944-2).Intercure 99NA is a low VOC, high solids, rapid cure primer/finish, offering excellent anticorrosive protection and long term colour and gloss durability – a combination that cannot be achieved with alternative fast cure, single coat primer finishes.Intercure 99NA may also be specified as a high build, durable intermediate/finish over approved anti-corrosive primers for more aggressive environments, i.e. ISO 12944 C4 and C5M.
    Lining
    Interline 967
    A two component, solvent free glass reinforced epoxy laminate system.
    Other
    Interplus 4102 Odin Gel
    A single component, water-based rust remover / cleaner gel. Interplus 4102 Odin Gel is 100% biologically degradable, free for toxins and conforms to the yellow classification of the Harmonised Offshore Chemical Notification Format (HOCNF).
    Primer
    Intergard 3210
    A two component, low VOC, high solids, fast curing epoxy primer for increased productivity pigmented with zinc phosphate to provide added anti-corrosive performance.
    Chemical Resistant Lining
    Polibrid 705E
    A two component solvent free elastomeric urethane.
    A chemically resistant elastomeric urethane which can be applied by heated, twin-feed airless spray.
    Other
    Interline 955 MR System
    Interline 995 MR Flakeline is a reinforced chemical resistant system. The system features a glass flake filled novolac vinyl ester topcoat for long-term chemical and heat resistance and fibre glass mat reinforcement to increase physical properties and where necessary bridge dynamic cracks in concrete.
    In the table below you can find System Sheet and Application guidelines. For Technical Datasheets and MSDSs please click on the links to the individual component products of the system below the table.
    Structural Concrete- Repair and Protection
    Intercrete 4851
    A two component, fast drying, water based epoxy and polymer modified cementitious flooring for the protection of concrete substrates.Intercrete 4851 exhibits both excellent flow characteristics and ease of application by pouring or pumping techniques to give a smooth surface finish. *Selective Countries Only - Please contact your local representative.
    Lining
    Enviroline 125LV
    An ultra high solids two component epoxy lining system.
    Fetching the data, please wait...