Lining
Interline 975P
A two component, solvent free, heavy duty epoxy tank lining.
BACK TO PRODUCTS
Water and Waste
Product Applications
Long term corrosion protection to the steel and concrete used in the Water and Wastewater market.
Filter by
Products
My Filters
Intermediate
Intercure 420HS
A two component, high solids, low VOC epoxy micaceous iron oxide intermediate coating offering excellent barrier protection, low temperature cure and rapid overcoating properties.
Other
Enviroline 405HTR MR System
Enviroline 405HTR MR is a reinforced chemcial resistant system. The system features a high temperature reesistant, 100% volume high solids, two component polycyclamine cured lining topcoat. Fibre glass mat reinforcement increases physical properties and where necessary allows dynamic crack bridging in concrete.In the table below you can find System Sheet and Application guidelines. For Technical Datasheets and MSDSs please click on the links to the individual component products of the system below the table.
Other
Interplus 4102 Odin Gel
A single component, water-based rust remover / cleaner gel. Interplus 4102 Odin Gel is 100% biologically degradable, free for toxins and conforms to the yellow classification of the Harmonised Offshore Chemical Notification Format (HOCNF).
Other
Interline 955 MR System
Interline 995 MR Flakeline is a reinforced chemical resistant system. The system features a glass flake filled novolac vinyl ester topcoat for long-term chemical and heat resistance and fibre glass mat reinforcement to increase physical properties and where necessary bridge dynamic cracks in concrete.
In the table below you can find System Sheet and Application guidelines. For Technical Datasheets and MSDSs please click on the links to the individual component products of the system below the table.
In the table below you can find System Sheet and Application guidelines. For Technical Datasheets and MSDSs please click on the links to the individual component products of the system below the table.
Other
Interline 984 MR System
Interline 984 MR is a reinforced chemcial resistant system. The system features a 100% volume high solids, two componentepoxy phenolic topcoat. Fibre glass mat reinforcement increases physical properties and where necessary allows dynamic crack bridging in concrete.In the table below you can find System Sheet and Application guidelines. For Technical Datasheets and MSDSs please click on the links to the individual component products of the system below the table.
Primer
Intergard 2575
A two component, high solids, low VOC, fast-curing epoxy zinc phosphate/micaceous iron oxide primer offering excellent barrier protection. Suitable for overcoating within 2 hours under common climatic conditions. Early handling properties make this an ideal primer for speeding up production and throughput.
Finish
Intercryl 530
A single component water borne finish formulated on weather resistant acrylic copolymer technology.
Surface Pre-Treatment
Interplus 4101
A single component, water-based rust remover / cleaner gel. Clean Gel is 100% biologically degradable, free for toxins and conforms to the yellow classification of the Harmonised Offshore Chemical Notification Format (HOCNF).
Lining
Interline 961
A two component, solvent based epoxy phenolic tank lining for application to both new steel, or lightly pitted surfaces.
Reference
Ceilcote 165 Grout
Ceilcote 165 Grout is a carefully blended, three component vinylester grout. It is designed for grouting pumps, vessels and equipment that are subjected to chemical exposure.
Primer
Intercure 1039
A two component epoxy zinc phosphate/micaceous iron oxide primer, formulated on proprietary polymer technology, which provides rapid cure and overcoating even under low temperature conditions.A high solids, low VOC product.
Primer-Finish
Interseal 738
A two component, low VOC, high solids epoxy, pigmented with aluminium to provide enhanced corrosion resistance.
Temperature Resistance
Intertherm 715
A functional coating for identification of hot spots and internal insulation failures, Intertherm 715 exhibits a visual color change in response to temperature rise. Based upon modified silicone technology, Intertherm 715 is a single component coating ideal for use on reaction vessels on chemical and petrochemical sites as a warning of dangerous temperature increases.