Finish
Devcryl 1449
A single component water borne finish formulated on weather resistant acrylic copolymer technology. *Please note this product is only available in North America.
BACK TO PRODUCTS
Water and Waste
Product Applications
Long term corrosion protection to the steel and concrete used in the Water and Wastewater market.
Filter by
Products
My Filters
Structural Concrete- Repair and Protection
Intercrete 4804 (formerly Marine Mortar S)
A two component, water-based (VOC-free), fibre reinforced, polymer modified, cementitious mortar with excellent adhesion for use in areas subject to early immersion. Intercrete 4804 cures rapidly to produce a high strength mortar with enhanced polymeric properties for the repair of voids in aggressive marine environments. Suitable for thicknesses up to 50mm.
Temperature Resistance
Intertherm 228HS
A highly crosslinked, two component, high build epoxy phenolic coating, Intertherm 228HS combines properties of corrosion and chemical resistance when used in high temperature service. Based upon novolac resin technology, Intertherm 228HS can be used in a wide range of highly corrosive environments operating at temperatures up to 230°C (446°F).
Intermediate
Interdur 8842
A two component, high solids, low VOC epoxy micaceous iron oxide coating formulated on proprietary polymer technology which provides rapid cure and overcoating even under low temperature conditions.
Structural Concrete- Repair and Protection
Intercrete 4874 (formerly Cemprotec 2000-BJT)
A high performance butyl tape which is designed to join two pieces of Intercrete 4872 waterproof composite tape together. Embedded into our Intercrete range of cementitious coatings, it forms an elastomeric joint between two lengths of tape to accommodate movement.
Other
Enviroline 405HTR MR System
Enviroline 405HTR MR is a reinforced chemcial resistant system. The system features a high temperature reesistant, 100% volume high solids, two component polycyclamine cured lining topcoat. Fibre glass mat reinforcement increases physical properties and where necessary allows dynamic crack bridging in concrete.In the table below you can find System Sheet and Application guidelines. For Technical Datasheets and MSDSs please click on the links to the individual component products of the system below the table.
Structural Concrete- Repair and Protection
Intercrete 4811 (formerly Bond-Prime)
A single component, water-based (VOC free), rapid curing, acrylic copolymer modified with a unique water-emulsified epoxy cross-linking agent. Intercrete 4811 is inherently hydrophobic and alkali resistant, making it ideal for application to a wide range of new and aged mineral substrates.
It is non-hazardous, and application is by brush, roller or airless spray to prime and stabilise surfaces prior to the application of Flexcrete’s specialist membranes. Intercrete 4811 cures to form a clear film with an identifying green tint, both on and within the substrate, to provide an ideal surface for subsequent treatment.
It is non-hazardous, and application is by brush, roller or airless spray to prime and stabilise surfaces prior to the application of Flexcrete’s specialist membranes. Intercrete 4811 cures to form a clear film with an identifying green tint, both on and within the substrate, to provide an ideal surface for subsequent treatment.
Finish
Devthane 379N
A low VOC, two component modified acrylic polyurethane finish giving excellent durability and long-term
recoatability, for use over correctly prepared primed surfaces. This product is also HAPS free and
exempt solvent free.
recoatability, for use over correctly prepared primed surfaces. This product is also HAPS free and
exempt solvent free.
Lining
Enviroline 405HTR
Enviroline 405HTR offers high temperature performance alongside a wide ranging chemical resistance, for increased operational flexibility. Formulated with innovative polycyclamine technology, Enviroline 405HTR is a low VOC novolac epoxy lining that allows rapid return to service in just 14 hours, minimizing process disruption and reducing overall installation costs. Enviroline 405HTR offers high temperature resistance to 150°C (302°F) in a variety of cargoes including crude oil and produced water.
Structural Concrete- Repair and Protection
Intercrete 4807 (formerly Ttiefill)
A single component, water-based (VOC free), polymer modified, fibre reinforced, Portland cement based repair compound which exhibits unique hydraulic properties to produce a rapid setting curing mortar with enhanced polymer properties.
Intercrete 4807 is ideally suited for the filling of voids, particularly in new construction, which needs to be rapidly put into service, such as tieholes, grout holes and voids around fixings.
Intercrete 4807 is ideally suited for the filling of voids, particularly in new construction, which needs to be rapidly put into service, such as tieholes, grout holes and voids around fixings.
Structural Concrete- Repair and Protection
Intercrete 4805 (formerly Monopour)
A single component, water-based (VOC free), high performance, polymer modified, non-shrink cementitious formulation. Intercrete 4805 is a flowing grout with a maximum aggregate size of 2.5mm for application thicknesses up to 100mm.
Finish
Interthane 990V
A low VOC, two component modified acrylic polyurethane finish giving excellent durability and long-term recoatability, for use over correctly prepared primed surfaces. This product is also HAPS free and exempt solvent free.International Paint also offers Interthane 990V in a mildew resistant, bright white finish. Contact your International Paint representative for additional information.
Structural Concrete- Repair and Protection
Intercrete 4810 (formerly Polymer Admixture 850)
A single component, water-based (VOC free), advanced copolymer dispersion which, when used as an admixture for sand and cement mixes, produces a high strength waterproof patching mortar, screed or render. It can also be mixed with cement to produce a slurry for sealing porous and absorbent substrates.