Lining
Interline 975P
A two component, solvent free, heavy duty epoxy tank lining.
BACK TO PRODUCTS
Water and Waste
Product Applications
Long term corrosion protection to the steel and concrete used in the Water and Wastewater market.
Filter by
Products
My Filters
Intermediate
Interdur 8842
A two component, high solids, low VOC epoxy micaceous iron oxide coating formulated on proprietary polymer technology which provides rapid cure and overcoating even under low temperature conditions.
Other
Enviroline 405HTR MR System
Enviroline 405HTR MR is a reinforced chemcial resistant system. The system features a high temperature reesistant, 100% volume high solids, two component polycyclamine cured lining topcoat. Fibre glass mat reinforcement increases physical properties and where necessary allows dynamic crack bridging in concrete.In the table below you can find System Sheet and Application guidelines. For Technical Datasheets and MSDSs please click on the links to the individual component products of the system below the table.
Temperature Resistance
Intertherm 3350
A single component, spray applied insulation coating based upon waterborne acrylic technology, Intertherm 3350 is suitable for use on substrates operating up to 177°C (350°F). Combining superior thin film insulation performance with easy application, Intertherm 3350 can improve productivity and minimize energy loss. Where suitable, Intertherm 3350 provides a seamless adherent insulating film enabling the removal of equipment from a corrosion under insulation (CUI) inspection program and mitigating a facility's overall CUI exposure.
Other
Interplus 4102 Odin Gel
A single component, water-based rust remover / cleaner gel. Interplus 4102 Odin Gel is 100% biologically degradable, free for toxins and conforms to the yellow classification of the Harmonised Offshore Chemical Notification Format (HOCNF).
Primer
Interdur 8800
A two component, low VOC, high solids, fast curing anticorrosive epoxy primer pigmented with zinc phosphate. CHINA ONLY
Other
Interline 955 MR System
Interline 995 MR Flakeline is a reinforced chemical resistant system. The system features a glass flake filled novolac vinyl ester topcoat for long-term chemical and heat resistance and fibre glass mat reinforcement to increase physical properties and where necessary bridge dynamic cracks in concrete.
In the table below you can find System Sheet and Application guidelines. For Technical Datasheets and MSDSs please click on the links to the individual component products of the system below the table.
In the table below you can find System Sheet and Application guidelines. For Technical Datasheets and MSDSs please click on the links to the individual component products of the system below the table.
Structural Concrete- Repair and Protection
Intercrete 4822 (formerly Monolevel FC)
A single component, water-based (VOC-free), polymer modified, fibre reinforced cementitious repair mortar with high adhesive properties, allowing it to be used as a thin screed or filler to provide a fair-faced finish. It cures to provide enhanced freeze/thaw resistance and protection from the ingress of water, acid gases and chlorides. It is supplied as a single component system requiring only the addition of clean water.
Structural Concrete- Repair and Protection
Intercrete 4813 (formerly Metal-Prime WB)
A single component, water-based (VOC free), epoxy and acrylic-based anti-corrosion primer. Intercrete 4813 is a phosphate free formulation which forms a distinctive oxide red film upon application, ensuring even coverage of the substrate.
Extremely effective at preventing flash rusting and rust creep around holidays or areas of damage.
Extremely effective at preventing flash rusting and rust creep around holidays or areas of damage.
Other
Interline 984 MR System
Interline 984 MR is a reinforced chemcial resistant system. The system features a 100% volume high solids, two componentepoxy phenolic topcoat. Fibre glass mat reinforcement increases physical properties and where necessary allows dynamic crack bridging in concrete.In the table below you can find System Sheet and Application guidelines. For Technical Datasheets and MSDSs please click on the links to the individual component products of the system below the table.
Structural Concrete- Repair and Protection
Intercrete 4806 (formerly Monopour)
A single component, water-based (VOC free), high performance, polymer modified, non-shrink cementitious formulation. Intercrete 4806 is a micro-concrete with a maximum aggregate size of 6mm for larger depths up to 200mm
Surface Pre-Treatment
Interplus 4103
A single component, water-based rust remover / cleaner concentrated fluid. Clean Cons is 100% biologically degradable, free from toxins and conforms to the yellow classification of the Harmonised Offshore Chemical Notification Format (HOCNF).