Wind Power

Product Applications

We are a single source supplier of coatings for wind turbines - from tip to toe.

Filter by

Products

135 Product Found
My Filters
    Subsea, Abrasion Resistant and Splashzone
    Interzone 762
    A two component, styrene free, glass flake reinforced ambient cure polyester/acrylic copolymer coating.
    Filler
    RELEST Wind Putty Contour - I373-3615
    RELEST Wind Putty Contour 3K is a Solvent-free, highly viscous polyurethane putty for smoothing surface and contour irregularities. Its easy sanding and rapid cure properties offers increased productivity for further processing and recoating. RELEST Wind Putty Contour is ideally situated for manual application.
    Passive Fire Protection
    Chartek 1960 CSP
    Chartek 1960CSP intumescent material combined hydrocarbon fire protection and insulation against cryogenic liquid exposure.
    Topcoat
    RELEST Wind HS Topcoat - I306-xxxx
    RELEST Wind HS Topcoat is a matt waterborne 2K acrylic polyurethane topcoat for use as a finishing coat on rotor blades. It offers quick drying for fast overcoating, even at high film thicknesses without the risk of blistering. It is suited for roller and spray applciaiton. RELEST Wind HS Topcoat has excellent UV and weathering resistance properties for long term protection and performance.
    Primer
    Interdur 8802
    A two component epoxy zinc phosphate/micaceous iron oxide primer, formulated on proprietary polymer technology, which provides rapid cure and overcoating even under low temperature conditions. A high solids, low VOC product. CHINA ONLY
    Other
    RELEST Wind LEP ETU - I374-6735
    RELEST Wind LEP Easy To Use is a two-component solvent-free polyurethane coating for the M&R market which is especially designed for protecting the leading edge of rotor blades of wind energy plants from erosion damage caused by rain, sand, hail, dirt and other particles suspended in the air. The coating consists of an exceptionally fast, hard wearing, UV- and abrasion resistant polyurethane elastomer.
    Primer
    Interdur 8816
    A two component, metallic zinc rich epoxy primer, which complies with the composition requirements of Chinese Chemical Industrial Standard HG/T3668.
    Other
    RELEST Wind Gelcoat - I372-7235
    RELEST Wind Gelcoat ca. RAL 7035, RA is a solvent free 2k viscoplastic, polyaspartic coating with excellent abrasion resistance. Suitable as part of a coating system for UV- and weather- resistance. Film thicknesses of approximately 200μm can be achieved in one step with optimal flow properties. RELEST Wind Gelcoat ca. RAL 7035, RA is characterised by its great adhesion to epoxy laminate.
    Lining
    Enviroline 376F-30LT
    Low Temperature Application and Cure Tank Lining.
    Surface Tolerant
    RELEST Wind Putty Porefiller - I372-5915
    RELEST Wind Putty Porefiller is a 2K polyurethane for filling medium pinholes. UV- and weather- resistant with very fast drying properties and long workable life. It is compatible with all RELEST coating systems and can be recoated without sanding.
    Lining
    Interline 975P
    A two component, solvent free, heavy duty epoxy tank lining.
    Filler
    RELEST Wind Putty Contour - I373-9901
    RELEST Wind Putty Contour is a Solvent-free, highly viscous polyurethane putty for smoothing surface and contour irregularities. Its easy sanding and rapid cure properties offers increased productivity for further processing and recoating. RELEST Wind Putty Contour is ideally situated for mechanical application.
    Other
    Interplus 4102 Odin Gel
    A single component, water-based rust remover / cleaner gel. Interplus 4102 Odin Gel is 100% biologically degradable, free for toxins and conforms to the yellow classification of the Harmonised Offshore Chemical Notification Format (HOCNF).
    Topcoat
    RELEST Wind WB Topcoat HB - I394-x5xx
    RELEST Wind WB Topcoat is a two-component water-based topcoat for rotor blades of wind energy plants and is characterised by its excellent weather resistance and levelling. A major advantage of this product is its application reliability at high film thicknesses >100μm dry film thickness.
    Primer
    Intergard 3210
    A two component, low VOC, high solids, fast curing epoxy primer for increased productivity pigmented with zinc phosphate to provide added anti-corrosive performance.
    Fetching the data, please wait...