We are a single source supplier of coatings for wind turbines - from tip to toe.
A high performance, two component, reinforced inorganic zinc-rich primer. NORTH AMERICA ONLY
Ceilcote 242 Flakeline is a flake filled vinyl ester coating with excellent resistance to organic and inorganic acid solutions and many aliphatic solvents.It offers outstanding chemical resistance with quick turn around for service. Ceilcote 242 Flakeline also meets FDA requirements.
CEILCOTE 749DP Grout is a three-component chemical-resistant epoxy grouting material designed for virtually unlimited pour depths. It provides high flowability, high strength, good adhesion to concrete and steel, resists degradation by corrosive chemicals and does not compromise strength.
With an unrivalled track record spanning more than 20 years, Chartek 7 provides exceptional protection for long duration pool and jet fires, and proven long term corrosion resistance. It is the most widely certified epoxy intumescent in the world and has protected over six million square meters of steel globally.
An ultra high solids, two component polycyclamine cured lining system utilising advanced epoxy technology, designed for single-leg application.
A solvent free, two component polycyclamine cured lining system utilising advanced epoxy novolac technology.
A solvent free, two component polycyclamine cured lining system utilising advanced epoxy novolac technology with flake and fibre reinforcement.
Enviroline 405HTR offers high temperature performance alongside a wide ranging chemical resistance, for increased operational flexibility. Formulated with innovative polycyclamine technology, Enviroline 405HTR is a low VOC novolac epoxy lining that allows rapid return to service in just 14 hours, minimizing process disruption and reducing overall installation costs. Enviroline 405HTR offers high temperature resistance to 150°C (302°F) in a variety of cargoes including crude oil and produced water.
Interbond 1202UPC is a universal pipe coating that provides external protection for above ground piping and accessories operating between -196ºC (-321ºF) and 650ºC (1202ºF). Interbond 1202UPC reduces coating complexity and overall project painting costs by standardizing coating specifications, providing excellent corrosion protection in a wide range of operating environments including corrosion under insulation (CUI) conditions. Based on an inorganic copolymer resin system, Interbond 1202UPC is compliant with the performance criteria of the ISO12944-9 cyclic aging test, without a primer.
Interchar 1120 will maintain architectural aesthetics for fire resistance periods up to 120 minutes and it is independently tested for up to three hour fire resistance. Interchar 1120 is a single component, low VOC waterborne intumescent coating designed for onsite application to interior exposed structural steel.
Corrosion & fire protection coatings for buildings
Coatings for abrasive and corrosive environments
Coatings & fire protection for upstream oil & gas
Coatings & fire protection for downstream oil & gas