BACK TO PRODUCTS

Wind Power

Product Applications

We are a single source supplier of coatings for wind turbines - from tip to toe.

CASES

Essential Protection - London Wind Array

Filter by

Products

135 Product Found
My Filters
    Temperature Resistance
    Intertherm 50
    A single component, high temperature coating based on a moisture-curing silicone binder, Intertherm 50 is ideal for the protection of steel from corrosion at temperatures up to 540°C (1004°F). The moisture-curing crosslinking technology of Intertherm 50 allows multiple coats to be applied without heat curing.
    Intermediate
    Intergard 475HS
    Intergard 475HS is a low VOC, high solids, high build epoxy used to improve barrier protection for a range of anticorrosive coating systems in a wide range of aggressive environments. Intergard 475HS can be pigmented with MIO to provide improved overcoating properties, better facilitating application in the fabrication shop.
    Temperature Resistance
    Intertherm 228HS
    A highly crosslinked, two component, high build epoxy phenolic coating, Intertherm 228HS combines properties of corrosion and chemical resistance when used in high temperature service. Based upon novolac resin technology, Intertherm 228HS can be used in a wide range of highly corrosive environments operating at temperatures up to 230°C (446°F).
    Intermediate
    Interdur 8842
    A two component, high solids, low VOC epoxy micaceous iron oxide coating formulated on proprietary polymer technology which provides rapid cure and overcoating even under low temperature conditions.
    Structural Concrete- Repair and Protection
    Intercrete 4874 (formerly Cemprotec 2000-BJT)
    A high performance butyl tape which is designed to join two pieces of Intercrete 4872 waterproof composite tape together. Embedded into our Intercrete range of cementitious coatings, it forms an elastomeric joint between two lengths of tape to accommodate movement.
    Primer
    Intergard 291
    A two component epoxy anti-corrosive primer.
    Primer-Finish
    Intergard 345
    Intergard 345 is a versatile, low VOC, high solids, zinc phosphate direct-to-metal epoxy. Suitable for use as a one or two coat new construction primer-finish coating or as an intermediate over recommended anticorrosive primers. Intergard 345 offers excellent anticorrosive performance with rapid drying time and excellent early abrasion resistance resulting in high steel throughput and increased productivity.
    Primer
    Interzinc 52
    Containing 80% zinc, Interzinc 52 is a high performance two component zinc-rich epoxy primer with excellent application properties. Interzinc 52 complies with SSPC Paint 20 Level 2 and has been designed to provide maximum protection as part of an anticorrosive coating system for steel in aggressive environments in both maintenance and new construction situations
    Primer
    Intergard 251
    The fast drying and handling properties of Intergard 251 coupled with extended overcoatability make this an excellent primer for factory application prior to full system application on site. Intergard 251 is a two component anticorrosive zinc phosphate epoxy primer for use in both new construction and industrial maintenance for a wide range of anti-corrosive coatings systems.
    Primer
    Interprime 539
    A single component modified polyvinyl butyral, phosphoric acid etch primer free from zinc chromate.
    Finish
    Interthane 990V
    A low VOC, two component modified acrylic polyurethane finish giving excellent durability and long-term recoatability, for use over correctly prepared primed surfaces. This product is also HAPS free and exempt solvent free.International Paint also offers Interthane 990V in a mildew resistant, bright white finish. Contact your International Paint representative for additional information.
    Surface Tolerant
    Interseal 670HS Temperate
    A low VOC, two component high build, high solids surface tolerant epoxy maintenance coating. For use in temperate and warm environments.
    Primer
    Interzinc 42
    Interzinc 42 is a high quality general purpose two component epoxy zinc primer designed for use in maintenance and new construction. Containing 50% zinc, Interzinc 42 is recommended as part of an anticorrosive coating system for structures in a wide range of industries
    Finish
    Interfine 878
    Interfine 878 is a high performance, two component, isocyanate-free polysiloxane finish offering superior gloss and colour retention, maintaining aesthetics to highest standards. A tough and hard wearing finish, Interfine 878 exhibits good flexibility and abrasion resistance, suitable for both factory new construction and site maintenance application.
    Subsea, Abrasion Resistant and Splashzone
    Interzone 954
    With an extensive global track record spanning over 25 years, Interzone 954 is a high solids two component modified epoxy ideal for protecting and maintaining steel structures in the most severe environments. Particularly suited to maintenance situations, Interzone 954 is designed to give long term abrasion and corrosion protection in a single coat application and will continue to cure when immersed in water. Interzone 954 can also be used as a deck coating with appropriate aggregate.
    1. 1

    Sorry, we couldn't find any results
    Fetching the data, please wait...