Wind Power
Product Applications
We are a single source supplier of coatings for wind turbines - from tip to toe.
63 Products
Share product selection
SimpleMailto
Digg
Facebook
LinkedIn
Twitter
Filter by
Reset All Filter
Intershield 300
One of the offshore industry’s most trusted solutions with almost 30 years’ track record, Intershield 300 is a two component, abrasion resistant aluminum pigmented pure epoxy coating providing excellent long term anticorrosive protection.
Cathacoat 302H
A high performance, two component, reinforced inorganic zinc-rich primer. NORTH AMERICA ONLY
Ceilcote 242 Flakeline
Ceilcote 242 Flakeline is a flake filled vinyl ester coating with excellent resistance to organic and inorganic acid solutions and many aliphatic solvents.It offers outstanding chemical resistance with quick turn around for service. Ceilcote 242 Flakeline also meets FDA requirements.
Enviroline 376F-60
A solvent free, two component polycyclamine cured lining system utilising advanced epoxy novolac technology with flake and fibre reinforcement.
Enviroline 405HTR
Enviroline 405HTR offers high temperature performance alongside a wide ranging chemical resistance, for increased operational flexibility.
Interbond 1202UPC
Interbond 1202UPC is a universal pipe coating that provides external protection for above ground piping and accessories operating between -196ºC (-321ºF) and 650ºC (1202ºF). Interbond 1202UPC provides long term corrosion protection, as well as excellent resistance to corrosion under insulation (CUI).
Interchar 212
Solvent-free Interchar 212 is a high build, robust, two component modified epoxy intumescent providing damage resistant fire and corrosion protection for the most demanding construction projects. Interchar 212 has excellent mechanical and physical properties, all backed up by rigorous third party testing and approvals.
Interchar 404
The fast drying properties and rapid recoatability of Interchar 404 lead to improved productivity while maintaining architectural aesthetics. Interchar 404 is a single component, solvent-based intumescent coating offering up to 120 minutes fire resistance to structural steelwork in accordance to EN 13381-8.
Intercure 200
A two component epoxy zinc phosphate/micaceous iron oxide primer, formulated on proprietary polymer technology, which provides rapid cure and overcoating even under low temperature conditions.A high solids, low VOC product.
Intercure 200HS
Intercure 200HS is a fast drying two component, high solids, low VOC, zinc phosphate epoxy primer/intermediate offering excellent barrier protection, low temperature cure and rapid overcoating properties. Complete with MIO, Intercure 200HS can speed up production and throughput in fabrication shops.
