We are a single source supplier of coatings for wind turbines - from tip to toe.
One of the offshore industry’s most trusted solutions with almost 30 years’ track record, Intershield 300 is a two component, abrasion resistant aluminum pigmented pure epoxy coating providing excellent long term anticorrosive protection.
Enviroline 405HTR offers high temperature performance alongside a wide ranging chemical resistance, for increased operational flexibility.
Interbond 1202UPC is a universal pipe coating that provides external protection for above ground piping and accessories operating between -196ºC (-321ºF) and 650ºC (1202ºF). Interbond 1202UPC provides long term corrosion protection, as well as excellent resistance to corrosion under insulation (CUI).
A two component epoxy zinc phosphate/micaceous iron oxide primer, formulated on proprietary polymer technology, which provides rapid cure and overcoating even under low temperature conditions.A high solids, low VOC product.
Intercure 200HS is a fast drying two component, high solids, low VOC, zinc phosphate epoxy primer/intermediate offering excellent barrier protection, low temperature cure and rapid overcoating properties. Complete with MIO, Intercure 200HS can speed up production and throughput in fabrication shops.
A two component, isocyanate-free, high durability acrylic topcoat, Interfine 629 is ideal for existing structures and new construction where a high gloss, weather resistant finish is required to maintain aesthetics.
A two component, low VOC, high performance isocyanate-free crosslinking acrylic finish, Interfine 629HS provides high durability in terms of color and gloss retention in a wide variety of aggressive environments. Interfine 629HS is designed for use in both construction and industrial maintenance scenarios.
Intergard 269 is a fast drying two component epoxy primer that can withstand prolonged periods of weathering prior to overcoating. It can be used as a blast holding primer in immersed and exposed conditions and as a tie coat on zinc silicate to prevent zinc salt formation on weathering and pinholing of subsequent high build topcoats.
Intergard 345 is a versatile, low VOC, high solids, zinc phosphate direct-to-metal epoxy. Suitable for use as a one or two coat new construction primer-finish coating or as an intermediate over recommended anticorrosive primers.
A high build, high performance, two component epoxy with excellent chemical and abrasion resistance.