BACK TO PRODUCTS

Wind Power

Product Applications

We are a single source supplier of coatings for wind turbines - from tip to toe.

CASES

Essential Protection - London Wind Array

Filter by

Products

130 Product Found
My Filters
    Primer
    Interdur 8805
    A two component, rapid recoat, fast curing solvent based inorganic zinc rich ethyl silicate primer. Conforms to SSPC Paint 20 Level 3. Available in ASTM D520, Type II zinc dust version as standard.
    Finish
    Devthane 379
    A high performance, two-component chemically-cured aliphatic urethane gloss finish. *Please note this product is only available in North America.
    Temperature Resistance
    Intertherm 50
    A single component, high temperature coating based on a moisture-curing silicone binder, Intertherm 50 is ideal for the protection of steel from corrosion at temperatures up to 540°C (1004°F). The moisture-curing crosslinking technology of Intertherm 50 allows multiple coats to be applied without heat curing.
    Intermediate
    Intergard 475HS
    Intergard 475HS is a low VOC, high solids, high build epoxy used to improve barrier protection for a range of anticorrosive coating systems in a wide range of aggressive environments. Intergard 475HS can be pigmented with MIO to provide improved overcoating properties, better facilitating application in the fabrication shop.
    Subsea, Abrasion Resistant and Splashzone
    Interzone 762
    A two component, styrene free, glass flake reinforced ambient cure polyester/acrylic copolymer coating.
    Temperature Resistance
    Intertherm 228HS
    A highly crosslinked, two component, high build epoxy phenolic coating, Intertherm 228HS combines properties of corrosion and chemical resistance when used in high temperature service. Based upon novolac resin technology, Intertherm 228HS can be used in a wide range of highly corrosive environments operating at temperatures up to 230°C (446°F).
    Intermediate
    Interdur 8842
    A two component, high solids, low VOC epoxy micaceous iron oxide coating formulated on proprietary polymer technology which provides rapid cure and overcoating even under low temperature conditions.
    Primer
    Intergard 291
    A two component epoxy anti-corrosive primer.
    Passive Fire Protection
    Chartek 8E
    Boron-free Chartek 8E provides exceptional pool fire performance with up to 30% lower installed weight compared to alternative PFP products, allowing for greater flexibility in structural design. It improves coating efficiency through reduced number of coats and no mesh requirement for up to 60 minutes pool fire duration.
    Primer
    Intercure 1039
    A two component epoxy zinc phosphate/micaceous iron oxide primer, formulated on proprietary polymer technology, which provides rapid cure and overcoating even under low temperature conditions.A high solids, low VOC product.
    Primer-Finish
    Intergard 345
    Intergard 345 is a versatile, low VOC, high solids, zinc phosphate direct-to-metal epoxy. Suitable for use as a one or two coat new construction primer-finish coating or as an intermediate over recommended anticorrosive primers. Intergard 345 offers excellent anticorrosive performance with rapid drying time and excellent early abrasion resistance resulting in high steel throughput and increased productivity.
    Filler
    RELEST Wind Putty Contour - I373-3615
    RELEST Wind Putty Contour 3K is a Solvent-free, highly viscous polyurethane putty for smoothing surface and contour irregularities. Its easy sanding and rapid cure properties offers increased productivity for further processing and recoating. RELEST Wind Putty Contour is ideally situated for manual application.
    Passive Fire Protection
    Chartek 1960 CSP
    Chartek 1960CSP intumescent material combined hydrocarbon fire protection and insulation against cryogenic liquid exposure.
    Topcoat
    RELEST Wind HS Topcoat - I306-xxxx
    RELEST Wind HS Topcoat is a matt waterborne 2K acrylic polyurethane topcoat for use as a finishing coat on rotor blades. It offers quick drying for fast overcoating, even at high film thicknesses without the risk of blistering. It is suited for roller and spray applciaiton. RELEST Wind HS Topcoat has excellent UV and weathering resistance properties for long term protection and performance.
    Primer
    Interdur 8802
    A two component epoxy zinc phosphate/micaceous iron oxide primer, formulated on proprietary polymer technology, which provides rapid cure and overcoating even under low temperature conditions. A high solids, low VOC product. CHINA ONLY
    1. 1

    Sorry, we couldn't find any results
    Fetching the data, please wait...