We are a single source supplier of coatings for wind turbines - from tip to toe.
Ceilcote 749DP Corrosion Grout
CEILCOTE 749DP Grout is a three-component chemical-resistant epoxy grouting material designed for virtually unlimited pour depths. It provides high flowability, high strength, good adhesion to concrete and steel, resists degradation by corrosive chemicals and does not compromise strength.
An ultra high solids, two component polycyclamine cured lining system utilising advanced epoxy technology, designed for single-leg application.
A quick drying two component epoxy primer. Suitable for overcoating after prolonged periods of weathering. CHINA ONLY
A two component, rapid recoat, fast curing solvent based inorganic zinc rich ethyl silicate primer. Conforms to SSPC Paint 20 Level 3. Available in ASTM D520, Type II zinc dust version as standard.
Interdur 8806 is a two component solvent based inorganic zinc rich ethyl silicate based primer. CHINA ONLY
Interdur 8812 is a fast drying, two component, weldable zinc silicate pre-fabrication primer for application by manual or automatic spray. CHINA ONLY
A two component acrylic polyurethane finish giving excellent durability and long term recoatability.
A high performance, two component, fluorocarbon finish which affords extended lifetime to first maintenance when utilised as part of a high performance anti-corrosive system.
Intergard 269 is a fast drying two component epoxy primer that can withstand prolonged periods of weathering prior to overcoating. It can be used as a blast holding primer in immersed and exposed conditions and as a tie coat on zinc silicate to prevent zinc salt formation on weathering and pinholing of subsequent high build topcoats.
A two component epoxy finish coat suitable for brush, roller and spray application.