Infrastructure

Solutions for Structural Integrity and Design Excellence
  • Ensure safety and durability.
  • Enhance impact resistance.
  • Maintain design aesthetics for years to come.


Explore Case Studies

Filter by

Products

351 Product Found
My Filters
    Passive Fire Protection
    Interkote 1460
    Formulated with bauxite, Interkote 1460 provides cost-effective resistance for up to four hours hydrocarbon pool fire in accordance with UL 1709. Interkote 1460 is ideally suited for onshore facilities where onsite application of cement-based PFP is preferred.
    Preconstruction Primer
    Interplate 937
    A two pack, heat resistant zinc silicate shop (pre-construction) primer providing good corrosion protection (even after heating up to 800°C (1472°F)), with minimum production of zinc salts. Suitable for high speed welding and cutting with excellent resistance to damage caused by welding, gas cutting and fairing thereby reducing secondary surface preparation requirements in comparison to typical zinc silicate products.
    Lining
    Enviroline 375
    Enviroline 375 is a high solids, fast curing advanced hybrid epoxy novolac and can be applied as a one or two coat system to provide a wide range of chemical resistance.
    Lining
    Interline 1064
    Primer
    Enviroline 58UHS
    Enviroline 58UHS is an ultra high solids, low viscosity, <100g/l VOC compliant rust inhibitive epoxy primer.
    Intermediate
    RELEST Wind Gelcoat Transparent - I372-0002
    RELEST Wind Gelcoat Transparent is a viscoplastic, solvent-free polyaspartic coating with high tear propagation strength for use as an in-mould gelcoat. Suitable for making transparent, bubble-free and fast drying intermediate coats. RELEST Wind Gelcoat Transparent offers a pore-free surface after demoulding with very good UV stability allowing it to be topcoated without any additional working steps.
    Finish
    Devthane 378
    A high performance, two component, chemically cured, aliphatic urethane semi-gloss finish. *Please note this product is only available in North America.
    Structural Concrete- Repair and Protection
    Intercrete 4879 (formerly Cemprotec MCI 2020)
    A clear, water-based, organic surface treatment for existing concrete structures. Based on time proven, corrosion inhibiting technology, it has been specially formulated to migrate into concrete, by liquid and vapour diffusion, to form a protective monomolecular layer on steel reinforcement, which helps to reduce corrosion.
    The penetrative action of Intercrete 4879 ensures that it does not inhibit the free passage of water vapour and it has a minimal effect on surface appearance. It is most effective when used in conjunction with the Flexcrete Concrete Repair and Protection System in protecting steel in aggressive environments subject to high levels of chlorides, such as marine and highway structures. With corrosion inhibiting technology which was developed over 20 years ago, it has a proven track record of protecting and enhancing the durability of structures worldwide.
    Structural Concrete- Repair and Protection
    Intercrete 4851 (formerly Cemprotec E-Floor)
    A two component, fast drying, water based epoxy and polymer modified cementitious flooring for the protection of concrete substrates.Intercrete 4851 exhibits both excellent flow characteristics and ease of application by pouring or pumping techniques to give a smooth surface finish. *Selective Countries Only - Please contact your local representative.
    Primer
    Ceilcote 680M
    Ceilcote 680M Primer/Saturant is a low viscosity, 85% volume solids epoxy compound based on a unique adduct curing technology. This provides tolerance of surface moisture at temperatures down to 2ºC (32ºF) and the ability to cure in the presence of moisture. The addition of Ceilcote C#1 Powder provides conductivity where required.
    Other
    Ceilcote 242AR MR Flakeline System
    Ceilcote 242AR MR Flakeline is a reinforced chemical resistant system. The system features an abrasion resistant vinyl ester topcoat for long-term chemical and abrasion resistance. Fibre glass mat reinforcement to increase physical properties and where necessary bridge dynamic cracks in concrete.
    In the table below you can find System Sheet and Application guidelines. For Technical Datasheets and MSDSs please click on the links to the individual component products of the system below the table.
    Other
    Interseal 3377
    Interseal 3377 is designed to provide excellent short term protection against a wide range of contaminants such as dust, oil, grease, grinding debris, fly rust and coating application overspray whilst providing a degree of resistance to abrasion, grinding debris and scuffing.The dual protective and unique peelable properties of Interseal 3377 make it ideal for use in thosemarket areas where coated substrates require temporary protection against incidentalcontamination and damage, such as that experienced during transit or in a fabrication - assemblyconstruction process.Interseal 3377 can assist in providing a significant reduction in immediate and longer term coatingmaintenance costs whilst improving productivity during assembly and installation.
    Temperature Resistance
    Intertherm 3070
    Designed specifically for the subsea market, Intertherm 3070 is a two component phenolic epoxy novolac with excellent high temperature resistance and compatibility with cathodic protection.
    Lining
    Interline 850
    A versatile thin film epoxy phenolic tank lining with an extended overcoating interval of up to 30 days, Interline 850 expands your options when scheduling maintenance. It can be used direct to metal, as both holding primer and build coat in a system, and with tanks returning to service in as little as five days, Interline 850 can further improve schedule.
    Lining
    Interline 399
    A high performance, highly crosslinked two component epoxy novolac tank lining, with excellent heat and solvent resistance.
    Fetching the data, please wait...