Primer
Intergard 291
A two component epoxy anti-corrosive primer.
BACK TO PRODUCTS
Infrastructure
Solutions for Structural Integrity and Design Excellence
- Ensure safety and durability.
- Enhance impact resistance.
- Maintain design aesthetics for years to come.
Filter by
Products
My Filters
Surface Tolerant
Interbond 998PB
A solvent free, two component, high build, surface tolerant epoxy coating capable of being applied as a single or multi-coat system over abrasive blasted, hydroblasted or mechanically prepared steel surfaces.
Structural Concrete- Repair and Protection
Intercrete 4852 (formerly Cemprotec E-Floor HB)
A two component, fast drying, water based epoxy and polymer modified cementitious flooring for the levelling and protection of concrete substrates.Intercrete 4852 exhibits both excellent flow characteristics and ease of application by pouring or pumping techniques to give a smooth surface finish. *Selective Countries Only - Please contact your local representative.
Lining
Enviroline 124
A solvent free, two component polycyclamine cured girth weld coating system utilising advanced epoxy novolac technology.
Subsea, Abrasion Resistant and Splashzone
Interzone 101
A two component, solvent free epoxy which can be applied underwater and will cure underwater to give a corrosion and abrasion resistant coating.
Passive Fire Protection
Chartek 8E
Boron-free Chartek 8E provides exceptional pool fire performance with up to 30% lower installed weight compared to alternative PFP products, allowing for greater flexibility in structural design. It improves coating efficiency through reduced number of coats and no mesh requirement for up to 60 minutes pool fire duration.
Primer
Intertuf 262
A low VOC, two component corrosion inhibitive surface tolerant epoxy. Provides surface tolerant application and high build formulation. Can be utilised with an alternate converter for low temperature or fast recoat applications.
Finish
Devcryl 1449
A single component water borne finish formulated on weather resistant acrylic copolymer technology. *Please note this product is only available in North America.
Primer-Finish
Intergard 345
Intergard 345 is a versatile, low VOC, high solids, zinc phosphate direct-to-metal epoxy. Suitable for use as a one or two coat new construction primer-finish coating or as an intermediate over recommended anticorrosive primers. Intergard 345 offers excellent anticorrosive performance with rapid drying time and excellent early abrasion resistance resulting in high steel throughput and increased productivity.
Other
Ceilcote 800AR Coroline System
Ceilcote 800AR Coroline is a trowel-applied abrasion resistant epoxy novolac system designed specifically for the protection of steel and concrete against corrosive chemicals and abrasion. The system includes a fibreglass reinforcing layer.In the table below you can find System Sheet and Application guidelines. For Technical Datasheets and MSDSs please click on the links to the individual component products of the system below the table.
Lining
Enviroline 2960
An ultra high solids, two component lining system utilising advanced epoxy novolac technology, providing excellent impact resistance, abrasion resistance and adhesion properties.
Lining
Devmat 100
Devmat 100 is a thick-film, 100% solids reinforced, proprietary formulated epoxy-based internal lining. *Please note this product is only available in North America.
Passive Fire Protection
Chartek 1960 CSP
Chartek 1960CSP intumescent material combined hydrocarbon fire protection and insulation against cryogenic liquid exposure.