BACK TO PRODUCTS

Offshore Oil and Gas

Complete Coating Solutions for Harsh Offshore Environments

  • Protect assets from corrosion and extreme conditions.
  • Enhance safety with proven fireproofing.
  • Minimize maintenance with durable coatings.
     

EXPLORE CASE STUDIES

CASES

Fireproofing an Offshore Giant

Filter by

Products

189 Product Found
My Filters
    Finish
    Intercryl 530 (Formerly Devcryl 1448)
    A premium quality, low VOC, direct to metal acrylic semi-gloss enamel for high traffic interior - exterior areas of commercial, institutional and industrial structures. *Please note this product is only available in North America.
    Primer
    Enviroline 58HS
    Enviroline 58HS is a high solids, low viscosity 250g/l VOC compliant rust inhibitive epoxy polyamide primer designed as an excellent holding primer for interior or exterior steel, concrete, and masonry surfaces requiring an extended recoat window.
    Temporary Protection
    Interseal 1122
    A single component, spray applied, high build, water based coating for direct application over coated substrates and non-ferrous substrates. Interseal 1122 dries to form a non-tacky, tough, resilient temporary protective layer.
    Finish
    Devthane 379H
    A high performance, low VOC, two-component chemically-cured aliphatic urethane gloss finish. *Please note this product is only available in North America.
    Finish
    Interdur 8860
    A two component acrylic polyurethane finish giving excellent durability and long term recoatability.
    Chemical Resistant Lining
    Ceilcote 242HB Flakeline
    Ceilcote 242HB Flakelineis a glass flake filled vinyl ester high build lining for use on steel and concrete substrates.Ceilcote 242HB Flakelinehas excellent resistance to organic and inorganic acid solutions and many aliphatic solvents. The coating system can achieve a dry film thickness of up to 1350 microns (54 mils) in a single coat. The intent is to eliminate one application step where similar coating systems require two separate applications. Ceilcote 242HB Flakeline can be applied on concrete and metal surfaces with proper surface preparation. Uses Ceilcote #2 Hardener.
    Finish
    Interlac 648
    A single component, speciality fluorescent alkyd coating specifically formulated to provide maximum visibility.
    Lining
    Enviroline 405HT
    An ultra high solids, two component polycyclamine cured lining system utilising advanced epoxy novolac technology.
    Subsea, Abrasion Resistant and Splashzone
    Interzone 505
    A high solids, low VOC, high build glass flake epoxy, Interzone 505 is a tough, fast drying primer that provides excellent long term anticorrosive and abrasion protection. Interzone 505 is designed for the protection of steelwork in severe corrosive environments, such as splash zones, pilings and chemical plants.
    Primer
    Cathacoat 313
    A two component, metallic zinc rich epoxy primer which complies with the composition and performance requirements of SSPC Paint 20.
    Lining
    Enviroline 375
    Enviroline 375 is a high solids, fast curing advanced hybrid epoxy novolac and can be applied as a one or two coat system to provide a wide range of chemical resistance.
    Finish
    Devthane 378
    A high performance, two component, chemically cured, aliphatic urethane semi-gloss finish. *Please note this product is only available in North America.
    Primer
    Ceilcote 680M
    Ceilcote 680M Primer/Saturant is a low viscosity, 85% volume solids epoxy compound based on a unique adduct curing technology. This provides tolerance of surface moisture at temperatures down to 2ºC (32ºF) and the ability to cure in the presence of moisture. The addition of Ceilcote C#1 Powder provides conductivity where required.
    Temperature Resistance
    Interbond 1202UPC
    Interbond 1202UPC is a universal pipe coating that provides external protection for above ground piping and accessories operating between -196ºC (-321ºF) and 650ºC (1202ºF). Interbond 1202UPC reduces coating complexity and overall project painting costs by standardizing coating specifications, providing excellent corrosion protection in a wide range of operating environments including corrosion under insulation (CUI) conditions. Based on an inorganic copolymer resin system, Interbond 1202UPC is compliant with the performance criteria of the ISO12944-9 cyclic aging test, without a primer.
    Temperature Resistance
    Intertherm 3070
    Designed specifically for the subsea market, Intertherm 3070 is a two component phenolic epoxy novolac with excellent high temperature resistance and compatibility with cathodic protection.
    1. 1

    Sorry, we couldn't find any results
    Fetching the data, please wait...