BACK TO PRODUCTS

Onshore Oil and Gas

Reliable Coating Solutions for Long-Lasting Performance
  • Extend service life with durable coatings.
  • Reduce unplanned shutdowns with corrosion protection.
  • Optimize efficiency in tough onshore environments.
     

EXPLORE CASE STUDIES

CASES

Durable Protection for a Landmark LNG Project

Filter by

Products

413 Product Found
My Filters
    Structural Concrete- Repair and Protection
    Intercrete 4823 (formerly Monolevel RM)
    A pre-bagged, single component, water-based (VOC-free), fibre reinforced cementitious mortar which cures rapidly to produce a high performance, waterproof, fair-faced render. It is supplied as a single component system ready for on-site mixing and use, requiring only the addition of clean water. Thixotropic, single component, polymer modified, waterproof one-coat cementitious render.
    Other
    Interchar 1260
    Interchar 1260 is a class leading single component, zero VOC thin film waterborne intumescent coating designed for onsite application. It provides up to 90 minutes fire resistance to interior structural steelwork whilst maintaining desirable aesthetics. Its quick drying formulation allows for fast project completion with 60 minute fire protection provided via single coat application
    Other
    Ceilcote 662 MR Flakeline System
    Ceilcote 662 MR Flakeline is a reinforced chemcial resistant system. The system features a glass flake filled epoxy novolac with excellent resistance to a wide range of acids and alkali solutions. Fibre glass mat reinforcement increases physical properties and where necessary allows dynamic crack bridging in concrete.In the table below you can find System Sheet and Application guidelines. For Technical Datasheets and MSDSs please click on the links to the individual component products of the system below the table.
    Primer
    Interdur 8810
    A two component, metallic zinc rich epoxy primer which complies with the composition and performance requirements of HG/T3668. CHINA ONLY
    Lining
    Enviroline 405HT
    An ultra high solids, two component polycyclamine cured lining system utilising advanced epoxy novolac technology.
    Subsea, Abrasion Resistant and Splashzone
    Interzone 505
    A high solids, low VOC, high build glass flake epoxy, Interzone 505 is a tough, fast drying primer that provides excellent long term anticorrosive and abrasion protection. Interzone 505 is designed for the protection of steelwork in severe corrosive environments, such as splash zones, pilings and chemical plants.
    Lining
    Interline 944
    A two component solvent based thin film epoxy tank lining.
    Primer
    Ceilcote 370HT Primer
    Ceilcote 370HT Primer is a catalysed vinyl ester primer. It provides excellent bonding and adhesion for various polyester and vinyl ester linings, coatings and flooring systems, as well as for Ceilcote Hybrid Polymer systems. Uses Ceilcote #2 Hardener.
    Primer
    Cathacoat 313
    A two component, metallic zinc rich epoxy primer which complies with the composition and performance requirements of SSPC Paint 20.
    Temporary Protection
    Interseal 121
    A single component, spray applied, high build, water based coating for direct application over coated substrates and non-ferrous substrates. Interseal 121 dries to form a non-tacky, tough, resilient temporary protective layer.Interseal 121 utilises patented peelable technology to ensure rapid and complete removal at a wide range of temperatures without deterioration to the underlying coating or substrate.
    Passive Fire Protection
    Interkote 1460
    Formulated with bauxite, Interkote 1460 provides cost-effective resistance for up to four hours hydrocarbon pool fire in accordance with UL 1709. Interkote 1460 is ideally suited for onshore facilities where onsite application of cement-based PFP is preferred.
    Preconstruction Primer
    Interplate 937
    A two pack, heat resistant zinc silicate shop (pre-construction) primer providing good corrosion protection (even after heating up to 800°C (1472°F)), with minimum production of zinc salts. Suitable for high speed welding and cutting with excellent resistance to damage caused by welding, gas cutting and fairing thereby reducing secondary surface preparation requirements in comparison to typical zinc silicate products.
    Lining
    Enviroline 375
    Enviroline 375 is a high solids, fast curing advanced hybrid epoxy novolac and can be applied as a one or two coat system to provide a wide range of chemical resistance.
    Lining
    Interline 1064
    Lining
    Enviroline 405HT LV
    Enviroline 405HT LV is a 100 g/l VOC compliant ultra high solid, low viscosity version of Enviroline 405HT. Specifically designed for airless spray application equipment used to line interior pipe and where both outstanding abrasion resistance and excellent high temperature service performance are required.
    1. 1

    Sorry, we couldn't find any results
    Fetching the data, please wait...