Primer
Interzinc 52HS
A two component, high solids, low VOC, rapid curing metallic zinc rich epoxy primer which complies with the composition and performance requirements of SSPC Paint 20.
BACK TO PRODUCTS
Onshore Oil and Gas
Reliable Coating Solutions for Long-Lasting Performance
- Extend service life with durable coatings.
- Reduce unplanned shutdowns with corrosion protection.
- Optimize efficiency in tough onshore environments.
Filter by
Products
My Filters
Other
Intercrete 4801
Supplied as a single component, fibre reinforced, high build cement based repair mortar.Requires the addition of clean water at site. *Selective Countries Only - Please contact your local representative.
Reference
Ceilcote EJ-3
Ceilcote EJ3 is a two component, pourable polysulfide elastomer designed for use in applications requiring a chemical resistant sealant for horizontal joints. Ceilcote EJ4 is trowel grade, for use on vertical and overhead surfaces. When cured Ceilcote EJ3/EJ4 forms a tight fitting synthetic rubber compound to effectively seal out water and many aggressive chemical solutions
Primer-Finish
Interzone 278
A low VOC, two component high build, high solids, epoxy immersion coating. Designed to give long term protection in a single coat for immersion service situations. A winter curing agent is available to assist faster turn around times in cold conditions.
Primer
Interprime 1068
Interprime 1068 is an air drying Zinc Phosphate Primer designed for application to all types of steel surfaces. This primer is characterised by good anti-corrosive properties, easy application and the ability to protect hand cleaned steel. Interprime 1068 is primarily intended as a single coat system for use in mildly corrosive environments, classified in ISO12944-2 as up to and including C2.
Chemical Resistant Lining
Devran 124
100% solids novolac epoxy coating with excellent chemical resistance properties which may be applied on both vertical and horizontal surfaces. *Please note this product is only available in North America.
Structural Concrete- Repair and Protection
Intercrete 4852
A two component, fast drying, water based epoxy and polymer modified cementitious flooring for the levelling and protection of concrete substrates.Intercrete 4852 exhibits both excellent flow characteristics and ease of application by pouring or pumping techniques to give a smooth surface finish. *Selective Countries Only - Please contact your local representative.
Primer
Cathacoat 304L
A fast drying, heavy duty, inorganic zinc primer for all high performance coating systems designed to protect steel structures in severe service. Meets SSPC Paint 20 requirements.
Lining
Enviroline 125U
A solvent free, two component, reinforced polycyclamine cured lining system utilising advanced epoxy novolac technology.
Preconstruction Primer
Interplate 408
A two component iron oxide epoxy shop primer. Approved for welding by Newcastle Primary Care Trust (NOHA). Approved for welding by Lloyd's Register.
Lining
Enviroline 405HT BR
Enviroline 405HT BR is an ultra high solids brush grade version of Enviroline 405HT and is specifically designed for stripe coat application over welds and seams in tanks that require excellent heat resistance with outstanding corrosion protection.
Finish
Devlac 1431
A single component alkyd gloss enamel finish. *Please note this product is only available in North America.