Primer
Interseal 1052
A two component, low VOC, high solids, fast curing anticorrosive epoxy primer.Zinc Phosphate version also available.
BACK TO PRODUCTS
Transportation and Pipeline
Product Applications
Effective corrosion protection against some of the most aggressive chemicals, maximizing in-service time and profitability
Filter by
Products
My Filters
Primer-Finish
Interthane 3230G
A two component, gloss, low VOC, high solids, fast curing, polyurethane primer/finish pigmented with zinc phosphate to provide added anti-corrosive performance and a durable, decorative finish.
Intermediate
Intercure 384
A two component, high solids, low VOC epoxy micaceous iron oxide intermediate coating offering excellent barrier protection, low temperature cure and rapid overcoating properties.Pigmented with micaceous iron oxide to comply with the requirements of BS5493:1977
Finish
Interfine 3399
A high performance, two component, fluorocarbon finish which affords extended lifetime to first maintenance when utilised as part of a high performance anti-corrosive system. Interfine 3399 offers superior gloss and colour retention and provides significantly improved resistance to yellowing and chalking when compared to typical conventional topcoats including catalysed acrylic, and polyurethane finishes.
Structural Concrete- Repair and Protection
Intercrete 4804 (formerly Marine Mortar S)
A two component, water-based (VOC-free), fibre reinforced, polymer modified, cementitious mortar with excellent adhesion for use in areas subject to early immersion. Intercrete 4804 cures rapidly to produce a high strength mortar with enhanced polymeric properties for the repair of voids in aggressive marine environments. Suitable for thicknesses up to 50mm.
Structural Concrete- Repair and Protection
Intercrete 4807 (formerly Ttiefill)
A single component, water-based (VOC free), polymer modified, fibre reinforced, Portland cement based repair compound which exhibits unique hydraulic properties to produce a rapid setting curing mortar with enhanced polymer properties.
Intercrete 4807 is ideally suited for the filling of voids, particularly in new construction, which needs to be rapidly put into service, such as tieholes, grout holes and voids around fixings.
Intercrete 4807 is ideally suited for the filling of voids, particularly in new construction, which needs to be rapidly put into service, such as tieholes, grout holes and voids around fixings.
Structural Concrete- Repair and Protection
Intercrete 4853 (formerly Cemprotec Levelling Coat)
A two component epoxy and polymer modified cementitious coating / wearing screed for levelling and waterproofing concrete substrates. It incorporates advanced cement chemistry, metakaolin, fibre, epoxy and styrene acrylic copolymer technology to give enhanced performance and excellent adhesion to concrete surfaces. When mixed, it exhibits a degree of flow to enable ease of application by pouring or pumping techniques to give an even finish. It hydrates to form a dense screed, which exhibits both polymeric and resinous properties giving low permeability to water and ensuring long term performance. It is specially formulated to harden rapidly to form a durable surface, which can typically be overcoated within 24 hours.
Structural Concrete- Repair and Protection
Intercrete 4800 (formerly Monomix WS)
A single component, water-based (VOC-free), polymer modified, fibre reinforced, low density cementitious repair mortar. The thixotropic nature of the product enables easy high build hand and trowel application for the structural repair of voids and the rendering and re-profiling of vertical, horizontal and overhead surfaces. Intercrete 4800 is supplied as a single pack system requiring only the addition of clean water.
Structural Concrete- Repair and Protection
Intercrete 4814 (formerly Monosil)
A single component, water-based (VOC free), mixture of silane, siloxane and synthetic resins which imparts maximum water and oil repellency to mineral substrates. It penetrates the surface pores to minimise its effect on the appearance of the substrate and has minimal effect on the water vapour diffusion characteristics.
Structural Concrete- Repair and Protection
Intercrete 4812 (formerly Bonding Bridge 842)
A single component, water-based (VOC free), advanced, polymer modified, cementitious surface impregnant with high penetration into concrete.
Structural Concrete- Repair and Protection
Intercrete 4822 (formerly Monolevel FC)
A single component, water-based (VOC-free), polymer modified, fibre reinforced cementitious repair mortar with high adhesive properties, allowing it to be used as a thin screed or filler to provide a fair-faced finish. It cures to provide enhanced freeze/thaw resistance and protection from the ingress of water, acid gases and chlorides. It is supplied as a single component system requiring only the addition of clean water.
Structural Concrete- Repair and Protection
Intercrete 4825 (formerly Monorub)
A single component, water-based (VOC-free), polymer modified cementitious mortar for the filling of blow-holes and small surface defects in precast and in-situ concrete, whilst providing an aesthetic yet durable finish. The incorporation of a polymer enhances adhesion and imparts a high degree of water repellency to the surface of concrete, making it denser and more impermeable. Once cured, if required it can be overcoated with specialist membranes in the Flexcrete range to provide further protection and aesthetic quality.
Structural Concrete- Repair and Protection
Intercrete 4844 (formerly Cemprotec Clutch Filler)
A two component, water based, epoxy and cementitious modified polymer mortar for sealing the interlock or clutch between sheet piles. It incorporates advanced cement chemistry, microsilica, fibre, epoxy and styrene acrylic copolymer technology to provide multi-functional protection with enhanced chemical resistance. When mixed, it can be applied with a pointing gun exhibiting a high degree of thixotropy to enable ease of application and filling of the void without sagging. It is specially formulated to chemically accelerate the passivation of ferrous metals even in the presence of chlorides and give maximum adhesion to steel.
Structural Concrete- Repair and Protection
Intercrete 4813 (formerly Metal-Prime WB)
A single component, water-based (VOC free), epoxy and acrylic-based anti-corrosion primer. Intercrete 4813 is a phosphate free formulation which forms a distinctive oxide red film upon application, ensuring even coverage of the substrate.
Extremely effective at preventing flash rusting and rust creep around holidays or areas of damage.
Extremely effective at preventing flash rusting and rust creep around holidays or areas of damage.
Structural Concrete- Repair and Protection
Intercrete 4808 (formerly Unimatch)
A single component, water-based (VOC free), cosmetic grade, polymer modified cementitious mortar suitable for the repair of damaged, honeycombed or spalled concrete. Intercrete 4808 is highly waterproof and exhibits good build characteristics which can be used in vertical, overhead and other difficult areas of repair without the need for primers or supports. Colour and texture matching is easily achieved by mixing Grey and White grades at different ratios using trial mixes. Coloured aggregates and concrete pigments can also be blended in.