Structural Concrete- Repair and Protection
Intercrete 4854 (formerly Cemprotec EF Grit)
A quartz aggregate for abrasion and skid resistance for use within INTERCRETE-Floor systems
BACK TO PRODUCTS
Transportation and Pipeline
Product Applications
Effective corrosion protection against some of the most aggressive chemicals, maximizing in-service time and profitability
Filter by
Products
My Filters
Structural Concrete- Repair and Protection
Intercrete 4853 (formerly Cemprotec Levelling Coat)
A two component epoxy and polymer modified cementitious coating / wearing screed for levelling and waterproofing concrete substrates. It incorporates advanced cement chemistry, metakaolin, fibre, epoxy and styrene acrylic copolymer technology to give enhanced performance and excellent adhesion to concrete surfaces. When mixed, it exhibits a degree of flow to enable ease of application by pouring or pumping techniques to give an even finish. It hydrates to form a dense screed, which exhibits both polymeric and resinous properties giving low permeability to water and ensuring long term performance. It is specially formulated to harden rapidly to form a durable surface, which can typically be overcoated within 24 hours.
Primer-Finish
Interlac 789
A single component, rapid drying modified alkyd primer/finish, designed to provide both anti-corrosive properties and a decorative finish in a single coat.
Temperature Resistance
Intertherm 875
A single component, temperature resistant finish coating, Intertherm 875 is based on silicone and acrylic resins with thermally stable pigmentation. Intertherm 875 does not require heating between coats and it is suitable for steelwork operating at temperatures up to 260°C (500°F) in a wide range of industrial environments.
Finish
Devthane 378H
A high performance, low VOC, two-component chemically-cured aliphatic urethane semi-gloss finish.
Passive Fire Protection
Chartek 7
With an unrivalled track record spanning more than 20 years, Chartek 7 provides exceptional protection for long duration pool and jet fires, and proven long term corrosion resistance. It is the most widely certified epoxy intumescent in the world and has protected over six million square meters of steel globally.
Primer-Finish
Intercure 99NA
Intercure 99NA polyaspartic technology is applied as a single coat at 150-250 microns (6-10 mils) direct-to-metal using standard application equipment, reducing application time and labour costs compared to two coat applications in moderately corrosive environments (up to C3, ISO 12944-2).Intercure 99NA is a low VOC, high solids, rapid cure primer/finish, offering excellent anticorrosive protection and long term colour and gloss durability – a combination that cannot be achieved with alternative fast cure, single coat primer finishes.Intercure 99NA may also be specified as a high build, durable intermediate/finish over approved anti-corrosive primers for more aggressive environments, i.e. ISO 12944 C4 and C5M.
Lining
Bar-Rust 233H
A high performance, multi-purpose, surface tolerant, two-component chemically-cured epoxy semi-gloss coating for industrial applications.
Finish
Devlac 1432
A quick dry, corrosion resistant gloss enamel specially formulated for finishing metal products.
Primer
Interzinc 315
A two component high solids, low VOC metallic zinc-rich epoxy primer formulated on proprietary polymer technology which provides rapid cure and overcoating even under low temperature conditions.Interzinc 315 uses zinc dust conforming to the requirements of ASTM D520 Type II as a minimum standard.
Chemical Resistant Lining
Polibrid 705E
A two component solvent free elastomeric urethane.
A chemically resistant elastomeric urethane which can be applied by heated, twin-feed airless spray.
A chemically resistant elastomeric urethane which can be applied by heated, twin-feed airless spray.