BACK TO PRODUCTS

Wind Power

Comprehensive Coating Solutions for Renewable Energy
  • Protect wind turbines from harsh environments.
  • Extend component lifespan from tip to toe.
  • Ensure compliance with industry standards.
     

EXPLORE CASE STUDIES

CASES

Protecting the World's Largest Offshore Wind Farm

Filter by

Products

230 Product Found
My Filters
    Primer-Finish
    Interplus 1180
    A low VOC, high build, high solids two component multi purpose epoxy coating.A high perfomance surface tolerant primer finish or intermediate coat with outstanding water, chemical and solvent resistance. Interplus 1180 has fast cure at room temperature and outstanding cure at low temperatures.
    Primer
    RELEST Wind EP Process Coat - I355-0100
    RELEST Wind EP Process Coat is a two component, solvent free epoxy in-mould gel coat for wind turbine blade production.
    Preconstruction Primer
    Interplate 398
    A two component, fast drying modified epoxy phosphate prefabrication primer for manual or automatic spray application.
    Structural Concrete- Repair and Protection
    Intercrete 4880 (formerly Biodex HB Series 2)
    A single component, water-based (VOC-free), elastomeric, high build hygiene coating for walls and ceilings in demanding service conditions. Intercrete 4880 is a resin-rich biostatic membrane that incorporates the latest encapsulated protectant technology in combination with silver ions to give completely safe use and zero leaching into the surrounding environment. It effectively prevents the growth of mould and bacteria whilst proven silver ion technology has recognised benefits in limiting the spread of germs. The unique in-film chemistry allows for the ultra-slow, controlled release of active ingredients into the coating film throughout a long service life, even where harsh cleaning regimes are followed.
    Primer
    Interprime 741
    A revolutionary reinforced PVB single pack primer combining in one application etching and pre- treatment qualities for the preparation of ferrous and non-ferrous surfaces. This product has UK welding and Health certificates
    Structural Concrete- Repair and Protection
    Intercrete 4843 (formerly Bond-Prime S)
    A single component, water-based (VOC free), rapid curing, acrylic copolymer modified with a unique water-emulsified epoxy cross-linking agent and siloxane emulsion. Intercrete 4816 is inherently hydrophobic and alkali resistant, making it ideal for application to a wide range of new and aged mineral substrates.It is non-hazardous, and application is by brush, roller or airless spray to prime and stabilise surfaces prior to the application of Intercrete specialist membranes. Intercrete 4816 cures to form a clear film with an identifying green tint, both on and within the substrate, to provide an ideal surface for subsequent treatment.
    Primer-Finish
    Interthane 1070
    A two component, high build, acrylic polyurethane primer/finish, containing zinc phosphate anti-corrosive pigmentation, providing excellent durability and long-term recoatability.
    Primer
    Intergard 269
    Intergard 269 is a fast drying two component epoxy primer that can withstand prolonged periods of weathering prior to overcoating. It can be used as a blast holding primer in immersed and exposed conditions and as a tie coat on zinc silicate to prevent zinc salt formation on weathering and pinholing of subsequent high build topcoats.
    Temperature Resistance
    Intertherm 181
    A two component, high temperature resistant topcoat based on inorganic silicate technology.
    Primer-Finish
    Intergard 3450
    A two component, HAPs free, low VOC, high solids, fast curing epoxy primer/finish.
    Preconstruction Primer
    Interplate 317
    A fast drying, two component, weldable zinc silicate pre-fabrication primer for application by manual or automatic spray.
    Surface Pre-Treatment
    Interplus 4101
    A single component, water-based rust remover / cleaner gel. Clean Gel is free for toxins and conforms to the yellow classification of the Harmonised Offshore Chemical Notification Format (HOCNF).
    Primer
    Interseal 1052
    A two component, low VOC, high solids, fast curing anticorrosive epoxy primer.Zinc Phosphate version also available.
    Primer
    Interzinc 553
    A single component, zinc rich inorganic silicate primer, giving exceptional cathodic protection together with ease of use and application.
    Primer
    Intergard 251HS
    Early handling properties make Intergard 251HS an ideal primer for speeding up production and throughput. The need to thin is eliminated leading to even more cost savings and productivity benefits. Intergard 251HS is a two component, low VOC, high-solids fast curing epoxy primer containing zinc phosphate anticorrosive pigmentation.
    1. 1

    Sorry, we couldn't find any results
    Fetching the data, please wait...