BACK TO PRODUCTS

Wind Power

Comprehensive Coating Solutions for Renewable Energy
  • Protect wind turbines from harsh environments.
  • Extend component lifespan from tip to toe.
  • Ensure compliance with industry standards.
     

EXPLORE CASE STUDIES

CASES

Protecting the World's Largest Offshore Wind Farm

Filter by

Products

187 Product Found
My Filters
    Preconstruction Primer
    Interplate 855
    A two pack, zinc silicate shop (pre-construction) primer providing good corrosion protection even after heating up to 800°C (1472°F) and resistance to damage caused by welding, gas cutting and fairing. Suitable for fast welding processes and offers control of secondary surface preparation requirements.
    Chemical Resistant Lining
    Ceilcote 2000 Flakeline
    Ceilcote 2000 Flakeline is a high performance, flake filled epoxy novolac coating that is designed to provide maximum resistance to 98% sulphuric acid.
    Chemical Resistant Lining
    Interline 9001
    A patented, two component, high performance chemical tank lining with low absorption and easy clean characteristics requiring heated post cure.
    Passive Fire Protection
    Chartek ONE
    Chartek ONE is a high performance, boron free, modified epoxy intumescent fire ​protection solution.
    Topcoat
    RELEST Wind WB Topcoat LI - I394-x8xx
    RELEST Wind WB Topcoat LI is a waterborne 2K acrylic polyurethane topcoat for use as a finishing coat on rotor blades. It is fast drying and allows for rapid recoating even at high film thicknesses without the risk of blistering. RELEST Wind WB Topcoat LI offers excellent UV and weathering resistance.
    Primer
    Interdur 8803
    A high performance, two component, reinforced zinc-rich primer. CHINA ONLY
    Other
    Ceilcote 282 MR Flakeline System
    Ceilcote 282 MR Flakeline is a reinforced chemical resistant system. The system features a glass flake filled novolac vinyl ester topcoat for long-term chemical and heat resistance and fibre glass mat reinforcement to increase physical properties and where necessary bridge dynamic cracks in concrete.
    In the table below you can find System Sheet and Application guidelines. For Technical Datasheets and MSDSs please click on the links to the individual component products of the system below the table.
    Passive Fire Protection
    Interchar 1120HY
    A single component, borate and chlorine free, water borne intumescent coating designed for on-site application to interior exposed structural steel requiring protection from cellulosic fire. Interchar 1120HY is a low VOC acrylic intumescent material independently fire tested for up to 3 hour fire ratings in accordance with ASTM E119/UL263.
    Structural Concrete- Repair and Protection
    Intercrete 4870 (formerly Curing Membrane WB)
    A single component, water based acrylic curing membrane designed for use with the Intercrete repair and protection systems. *Selective Countries Only - Please contact your local representative.
    Finish
    Interlac 1017
    A single component alkyd gloss enamel finish.
    Other
    Ceilcote 242HT MR Flakeline System
    Ceilcote 242HT MR Flakeline is a reinforced chemical resistant system. The system features a glass flake filled vinyl ester topcoat for long-term chemical resistance and fibre glass mat reinforcement to increase physical properties and where necessary bridge dynamic cracks in concrete.
    In the table below you can find System Sheet and Application guidelines. For Technical Datasheets and MSDSs please click on the links to the individual component products of the system below the table.
    Primer
    Interprime 306
    A single component, fast drying, high build alkyd primer.
    Temperature Resistance
    Intertherm 875
    A single component, temperature resistant finish coating, Intertherm 875 is based on silicone and acrylic resins with thermally stable pigmentation. Intertherm 875 does not require heating between coats and it is suitable for steelwork operating at temperatures up to 260°C (500°F) in a wide range of industrial environments.
    Primer
    Interdur 8808
    A two component, metallic zinc rich epoxy primer which complies with the composition and performance requirements of SSPC Paint 20 and HG/T3668, designed to give fast cure at low temperatures. CHINA ONLY
    Lining
    Enviroline 378
    Enviroline 378 is a 100% solids, flexible, single coat, hybrid epoxy system designed as a seam sealer for bolted or riveted storage tanks.
    1. 1

    Sorry, we couldn't find any results
    Fetching the data, please wait...