BACK TO PRODUCTS

All Products

Filter by

Products

540 Product Found
My Filters
    Passive Fire Protection
    Chartek 1620CSP
    Chartek 1620CSP is a unique intumescent material that provides combined hydrocarbon fire protection and insulation when exposed to cryogenic liquids. A high build, solvent-free, two component epoxy, Chartek 1620CSP also provides excellent corrosion protection and blast resistance.
    Primer
    Cathacoat 304V
    Two component solvent based inorganic zinc rich ethyl silicate based primer.Meets SSPC Paint 20 requirements.
    Finish
    Devran 229V
    A low VOC, high performance, two component, isocyanate free crosslinking acrylic finish which provides good durability in terms of colour and gloss retention. *Please note this product is only available in North America.
    Preconstruction Primer
    Interplate 837
    A two pack heat resistant Ceramic Zinc Silicate anti-corrosive primer. Suitable for controlled cathodic protection.
    Primer-Finish
    Intergard 3500
    Designed for use in the rail industry as a one coat direct-to-metal exterior finish or a primer for approved topcoats; Intergard 3500 has excellent edge retentive properties and provides a combination of anti-corrosive barrier protection and abrasion, chemical fume and spillage resistance. Intergard 3500 is formulated with ultra high solids, providing an option where regulations or customer preference require low VOCs and zero HAPs coatings
    Lining
    Devchem 253HS
    A high solids, one coat, chemical resistant lining system with exceptional resistance to a wide range of chemicals and solvents.
    Other
    RELEST Wind Leading Edge Cartridge
    RELEST Wind LEP Cartridge is a two-component solvent-free polyurethane coating which is especially designed for protecting the leading edge of rotor blades of wind energy plants from erosion damage caused by rain, sand, hail, dirt and other particles suspended in the air. The coating consists of an exceptionally fast, hard wearing, UV- and abrasion resistant polyurethane elastomer. It is supplied in a convenient 2-component cartridge for direct application of minimal quantities without weighing.
    Finish
    RELEST Wind UHS Topcoat - I307-xxxx
    RELEST Wind UHS Topcoat is a two-component ultra-high solid topcoat for rotor blades of wind energy plants and is characterised by its excellent weather and rain erosion resistance.
    Primer
    Interprime 4198
    A one component, fast drying, high performance, universal alkyd primer pigmented with zinc phosphate. Suitable for use as a primer with single pack polysiloxanes.
    Filler
    RELEST Wind Putty Protect TEC - I373-4015
    RELEST Wind Putty Protect TEC is a two-component viscoplastic, solvent-free, fast curing and easy to sand polyurethane filler for smoothing surface and contour irregularities. RELEST Wind Putty Protect TEC is especially designed for protecting the leading edge of rotor blades of wind energy plants from erosion damage caused by rain, sand, hail, dirt and other particles suspended in the air.
    Primer-Finish
    Intergard 7562
    A low VOC, two component, internally flexibilised, high build, surface tolerant epoxy primer. Pigmented with aluminium for increased corrosion resistance. HAPs free.
    Lining
    Enviroline 399ABR
    A very high solids, thick-film, fast curing, single coat advanced hybrid epoxy system designed exclusively to provide high abrasion resistance.
    Structural Concrete- Repair and Protection
    Intercrete 4851
    A two component, fast drying, water based epoxy and polymer modified cementitious flooring for the protection of concrete substrates.Intercrete 4851 exhibits both excellent flow characteristics and ease of application by pouring or pumping techniques to give a smooth surface finish. *Selective Countries Only - Please contact your local representative.
    Other
    RELEST Wind Leading Edge - I374-0735
    RELEST Wind LEP is a two-component solvent-free polyurethane coating which is especially designed for protecting the leading edge of rotor blades of wind energy plants from erosion damage caused by rain, sand, hail, dirt and other particles suspended in the air. The coating consists of an exceptionally fast, hard wearing, UV- and abrasion resistant polyurethane elastomer.
    Filler
    RELEST Wind Putty Protect TEC Cartridge - I373-4115
    RELEST Wind Putty Protect TEC is a two-component viscoplastic, solvent-free, fast curing and easy to sand polyurethane filler for smoothing surface and contour irregularities. RELEST Wind Putty Protect TEC is especially designed for protecting the leading edge of rotor blades of wind energy plants from erosion damage caused by rain, sand, hail, dirt and other particles suspended in the air. It is supplied in a convenient 2-component cartridge for direct application of minimal quantities without weighing.
    1. 1

    Sorry, we couldn't find any results
    Fetching the data, please wait...