BACK TO PRODUCTS

All Products

Filter by

Products

34 Product Found
My Filters
    Primer
    Intergard 2511
    A two component, low VOC, high solids, epoxy primer containing zinc phosphate anti-corrosive pigmentation.This primer's versatile application properties provide robust film thickness control as supplied, without the need to thin.
    Concrete Repair
    Intergard 2002
    A two-component, high solids and high build polyamine-cured epoxy.
    Primer
    Intergard 3210
    A two component, low VOC, high solids, fast curing epoxy primer for increased productivity pigmented with zinc phosphate to provide added anti-corrosive performance.
    Primer
    Intergard 7500
    A two component, high volume solids, abrasion resistant pure epoxy coating pigmented with aluminium that provides excellent long term anti-corrosive protection. Intergard 7500 is capable of fast cure and has low temperature cure properties. Ideally suited for use as a universal primer in protecting underwater areas, splashzones, decks and structural steel.
    Intermediate
    Intergard 2005
    A two component high build epoxy semi gloss finish.
    Primer
    Intergard 251HS
    Early handling properties make Intergard 251HS an ideal primer for speeding up production and throughput. The need to thin is eliminated leading to even more cost savings and productivity benefits. Intergard 251HS is a two component, low VOC, high-solids fast curing epoxy primer containing zinc phosphate anticorrosive pigmentation.
    Primer
    Intergard 2575
    A two component, high solids, low VOC, fast-curing epoxy zinc phosphate/micaceous iron oxide primer offering excellent barrier protection. Suitable for overcoating within 2 hours under common climatic conditions. Early handling properties make this an ideal primer for speeding up production and throughput.
    Primer
    Intergard 2509
    A two component, low VOC, high solids, epoxy primer containing zinc phosphate anti-corrosive pigmentation. This primer's versatile properties provide optimised control where thin film application is required.
    Primer
    Intergard 1032
    A two component epoxy anti-corrosive primer pigmented with zinc phosphate.
    Primer
    Intergard 436
    A two component clear epoxy sealer.Can be applied to slightly damp concrete. Cures quickly, long pot life. Excellent resistance to most alkalis, solvents, mild acids and water. Good toughness and resilience. Excellent binding properties to weathered fibrous cement sheeting.
    Intermediate
    Intergard 475HS
    Intergard 475HS is a low VOC, high solids, high build epoxy used to improve barrier protection for a range of anticorrosive coating systems in a wide range of aggressive environments. Intergard 475HS can be pigmented with MIO to provide improved overcoating properties, better facilitating application in the fabrication shop.
    Primer
    Intergard 291
    A two component epoxy anti-corrosive primer.
    Primer-Finish
    Intergard 345
    Intergard 345 is a versatile, low VOC, high solids, zinc phosphate direct-to-metal epoxy. Suitable for use as a one or two coat new construction primer-finish coating or as an intermediate over recommended anticorrosive primers. Intergard 345 offers excellent anticorrosive performance with rapid drying time and excellent early abrasion resistance resulting in high steel throughput and increased productivity.
    Primer
    Intergard 235
    A high build, high solids, low VOC two component epoxy primer.
    Primer
    Intergard 251
    The fast drying and handling properties of Intergard 251 coupled with extended overcoatability make this an excellent primer for factory application prior to full system application on site. Intergard 251 is a two component anticorrosive zinc phosphate epoxy primer for use in both new construction and industrial maintenance for a wide range of anti-corrosive coatings systems.
    1. 1

    Sorry, we couldn't find any results
    Fetching the data, please wait...