All Products

Filter by

Products

34 Product Found
My Filters
    Primer
    Intergard 1032
    A two component epoxy anti-corrosive primer pigmented with zinc phosphate.
    Primer
    Intergard 436
    A two component clear epoxy sealer.Can be applied to slightly damp concrete. Cures quickly, long pot life. Excellent resistance to most alkalis, solvents, mild acids and water. Good toughness and resilience. Excellent binding properties to weathered fibrous cement sheeting.
    Primer
    Intergard 2511
    A two component, low VOC, high solids, epoxy primer containing zinc phosphate anti-corrosive pigmentation.This primer's versatile application properties provide robust film thickness control as supplied, without the need to thin.
    Concrete Repair
    Intergard 2002
    A two-component, high solids and high build polyamine-cured epoxy.
    Primer-Finish
    Intergard 452
    Intergard 452 is a two component, high build epoxy intermediate. Pigmented with micaceous iron oxide to comply with the requirements of BS5493:1977
    Primer
    Intergard 272
    Two component epoxy coating.
    Pipe Lining
    Intergard 2272
    A low VOC, two component, high solids epoxy anti-corrosive flow coat.
    Primer
    Intergard 3210
    A two component, low VOC, high solids, fast curing epoxy primer for increased productivity pigmented with zinc phosphate to provide added anti-corrosive performance.
    Intermediate
    Intergard 2005
    A two component high build epoxy semi gloss finish.
    Finish
    Intergard 1735
    A high performance, low VOC, water borne two component epoxy with a high gloss finish.
    Primer-Finish
    Intergard 3500
    Designed for use in the rail industry as a one coat direct-to-metal exterior finish or a primer for approved topcoats; Intergard 3500 has excellent edge retentive properties and provides a combination of anti-corrosive barrier protection and abrasion, chemical fume and spillage resistance. Intergard 3500 is formulated with ultra high solids, providing an option where regulations or customer preference require low VOCs and zero HAPs coatings
    Sealer/Tie Coat
    Intergard 405
    A two component epoxy sealer coat, pigmented with micaceous iron oxide. Formulated on proprietary polymer technology, which provides rapid cure and overcoating, even at low temperatures.
    Primer-Finish
    Intergard 7562
    A low VOC, two component, internally flexibilised, high build, surface tolerant epoxy primer. Pigmented with aluminium for increased corrosion resistance. HAPs free.
    Primer-Finish
    Intergard 966
    A high build, high performance, two component epoxy intermediate or finish with excellent chemical and abrasion resistance. Available with conventional pigmentation or alternatively, pigmented with micaceous iron oxide to provide enhanced overcoating properties.
    Primer
    Intergard 242
    A general purpose, two component epoxy anti-corrosive primer pigmented with zinc phosphate to comply with BS5493:1977.
    Fetching the data, please wait...