A two component solvent free elastomeric urethane. A chemically resistant elastomeric urethane which can be applied by heated, twin-feed airless spray.
Ceilcote 242HB Flakelineis a glass flake filled vinyl ester high build lining for use on steel and concrete substrates.Ceilcote 242HB Flakelinehas excellent resistance to organic and inorganic acid solutions and many aliphatic solvents. The coating system can achieve a dry film thickness of up to 1350 microns (54 mils) in a single coat. The intent is to eliminate one application step where similar coating systems require two separate applications. Ceilcote 242HB Flakeline can be applied on concrete and metal surfaces with proper surface preparation. Uses Ceilcote #2 Hardener.
Interchar 2060 provides 60 minutes fire protection via single coat application while maintaining architectural aesthetics. It is a class leading single component, low VOC intumescent coating suitable for onsite and offsite application. Tested and certified to the highest standards, Interchar 2060 offers rapid drying times for fast handling and throughput.
A two component acrylic polyurethane finish giving excellent durability and long term recoatability.
A single component, spray applied, high build, water based coating for direct application over coated substrates and non-ferrous substrates. Interseal 1122 dries to form a non-tacky, tough, resilient temporary protective layer.
A high solids, abrasion resistant, aluminum pigmented pure epoxy coating, Intershield 300HS provides excellent long term anticorrosive protection and low temperature cure capability. Intershield 300HS is a universal primer that can also be used as a ballast tank coating
Interchar 1190 is a single component, low VOC waterborne intumescent coating designed for onsite application. Tested and approved to the highest standards, thin film Interchar 1190 provides up to two hours fire protection to interior exposed structural steel, while maintaining architectural aesthetics.
Designed specifically for the subsea market, Intertherm 3070 is a two component phenolic epoxy novolac with excellent high temperature resistance and compatibility with cathodic protection.
Ceilcote 282HB Flakeline has excellent resistance to hot flue gas environments. The coating system can achieve a dry film thickness of up to 1350 microns (54 mils) in a single coat with or without the use of a primer. The intent is to eliminate one applic ation step where similar coating systems require two seperate applications. Ceilcote 282HB Flakeline is normally applied on metal surfaces with proper surface preparation. Uses Ceilcote #2 Hardener.
A highly crosslinked, two component, high build epoxy phenolic coating, Intertherm 228HS combines properties of corrosion and chemical resistance when used in high temperature service. Based upon novolac resin technology, Intertherm 228HS can be used in a wide range of highly corrosive environments operating at temperatures up to 230°C (446°F).
