BACK TO PRODUCTS

Finish

Core Range

Filter by

Products

78 Product Found
My Filters
    Finish
    Interthane 990FD
    A two component fast dry acrylic polyurethane finish giving excellent durability and long term recoatability. Interthane 990FD is a regional product, supported in North America.
    Finish
    Interthane 870UHS
    A low VOC, high build, semi-gloss urethane finish with excellent gloss and colour retention on exterior exposure, for use over correctly prepared and primed surfaces.The VOC is below 250 g/l to conform to local VOC regulations.
    Finish
    Devlac 1432
    A quick dry, corrosion resistant gloss enamel specially formulated for finishing metal products. *Please note this product is only available in North America.
    Finish
    Intersheen 7579
    Intersheen 7579 is a fast drying, one pack, modified acrylic finish that is optimised to provide low VOC and high volume solids.
    Finish
    Intercryl 988
    Single pack pure acrylic membrane coating designed to provide high quality cosmetic appearance with protection. It is also the preferred coating for sprayed polyurethane foam and is a long life finish coat over Intergard 436 on fibre cement roofing. Intercryl 988 has high volume solids, exhibits long term resistance to UV and atmospheric pollution and remains permanently flexible and elastic.
    Finish
    Interbuild 1003
    Interbuild 1003 is a high performance, two component epoxy primer with excellent chemical and abrasion resistance properties. Interbuild 1003 is especially suited for mechanically prepared concrete substrates or porous substrates that prone to weakness, due to excellent penetration and high adhesion properties.
    Finish
    Interbuild 1091
    Interbuild 1091 is a two component isocyanate cured polyurethane coating. It is a high performance, nonyellowing product. It is easy to apply. This product is tintable in a wide range of colours. It has excellent gloss and colour retention. It has good chemical, abrasion and impact resistance. If enhanced slip resistance is required GM Non Slip can be used in the system. To be used as topcoat in atmospheric environments. Interbuild 1091 is best suited for light traffic areas.
    Finish
    Intercryl 853
    A heavy duty water borne acrylic coating. Excellent weather resistance. Outstanding gloss and colour retention over extended periods.
    Topcoat
    RELEST Wind WB Topcoat HB - I394-x5xx
    RELEST Wind WB Topcoat is a two-component water-based topcoat for rotor blades of wind energy plants and is characterised by its excellent weather resistance and levelling. A major advantage of this product is its application reliability at high film thicknesses >100μm dry film thickness.
    Finish
    RELEST Wind UHS Topcoat - I307-xxxx
    RELEST Wind UHS Topcoat is a two-component ultra-high solid topcoat for rotor blades of wind energy plants and is characterised by its excellent weather and rain erosion resistance.
    Finish
    Interthane 4379
    A high performance, two-component chemically-cured aliphatic polyurethane gloss finish for use in areas where maximum gloss and colour retention are required.
    Finish
    Interdur 8862
    A two component epoxy finish coat suitable for brush, roller and spray application. CHINA ONLY
    Finish
    Interfine 2700
    Direct-to-Metal epoxy polysiloxane finish
    Finish
    Interdur 8863
    A high performance, two component, fluorocarbon finish which affords extended lifetime to first maintenance when utilised as part of a high performance anti-corrosive system. Interdur 8863 offers superior gloss and colour retention and provides significantly improved resistance to yellowing and chalking when compared to typical conventional topcoats including catalysed acrylic, and polyurethane finishes. CHINA ONLY
    Finish
    InterH2O 699 PA Series
    A two component, high performance water based acrylic polyurethane finish with excellent appearance and durability.
    1. 1

    Sorry, we couldn't find any results
    Fetching the data, please wait...