Finish

Core Range

Filter by

Products

77 Product Found
My Filters
    Finish
    Interthane 976
    A two component, fast drying, acrylic polyurethane clear finish giving excellent durability and long term recoatability.
    Finish
    Interthane1022
    A two component acrylic polyurethane finish giving excellent durability and long term recoatability
    Finish
    Interlac 800
    A single component, high solids, low VOC, 30% silicone content, modified epoxy
    Finish
    Intercryl 988
    Single pack pure acrylic membrane coating designed to provide high quality cosmetic appearance with protection. It is also the preferred coating for sprayed polyurethane foam and is a long life finish coat over Intergard 436 on fibre cement roofing. Intercryl 988 has high volume solids, exhibits long term resistance to UV and atmospheric pollution and remains permanently flexible and elastic.
    Finish
    Interbuild 1003
    Interbuild 1003 is a high performance, two component epoxy primer with excellent chemical and abrasion resistance properties. Interbuild 1003 is especially suited for mechanically prepared concrete substrates or porous substrates that prone to weakness, due to excellent penetration and high adhesion properties.
    Finish
    Interthane 990FD
    A two component fast dry acrylic polyurethane finish giving excellent durability and long term recoatability. Interthane 990FD is a regional product, supported in North America.
    Finish
    Interthane 990UHS
    A low VOC, two component acrylic polyurethane high performance finish coat with excellent gloss and colour retention on exterior exposure, for use over correctly prepared primed surfaces.International Paint also offers Interthane 990UHS in a mildew resistant, bright white finish. Contact your International Paint representative for additional information.
    Finish
    Interbuild 1091
    Interbuild 1091 is a two component isocyanate cured polyurethane coating. It is a high performance, nonyellowing product. It is easy to apply. This product is tintable in a wide range of colours. It has excellent gloss and colour retention. It has good chemical, abrasion and impact resistance. If enhanced slip resistance is required GM Non Slip can be used in the system. To be used as topcoat in atmospheric environments. Interbuild 1091 is best suited for light traffic areas.
    Finish
    Intercryl 853
    A heavy duty water borne acrylic coating. Excellent weather resistance. Outstanding gloss and colour retention over extended periods.
    Topcoat
    RELEST Wind WB Topcoat HB - I394-x5xx
    RELEST Wind WB Topcoat is a two-component water-based topcoat for rotor blades of wind energy plants and is characterised by its excellent weather resistance and levelling. A major advantage of this product is its application reliability at high film thicknesses >100μm dry film thickness.
    Finish
    Intergard 1735
    A high performance, low VOC, water borne two component epoxy with a high gloss finish.
    Finish
    Interthane 1021
    A two component, high build, acrylic polyurethane primer/finish providing anti-corrosion barrier protection and long term recoatability.
    Finish
    Interthane 1057
    A two component, fast drying acrylic aliphatic polyurethane finish giving excellent durability and a high gloss finish.
    Finish
    RELEST Wind UHS Topcoat - I307-xxxx
    RELEST Wind UHS Topcoat is a two-component ultra-high solid topcoat for rotor blades of wind energy plants and is characterised by its excellent weather and rain erosion resistance.
    Finish
    Interthane 4379
    A high performance, two-component chemically-cured aliphatic polyurethane gloss finish for use in areas where maximum gloss and colour retention are required.
    Fetching the data, please wait...