A two component, solvent free, heavy duty epoxy tank lining.
Lining
Enviroline 3910
Designed for use in the rail market as a lining for the protection of ferrous substrates where transportation and storage of a broad range of commodities are required. It is suitable for use in rail cars, including jumbo hopper cars, intended to transport and store plastic pellets and dry bulk products.
Lining
Interline 925P
A two component, solvent free, heavy duty epoxy tank and pipe lining.
Lining
Enviroline 2405LT
Enviroline 2405LT builds on the successful track record of Enviroline 2405 in offering low temperature application and quick cure down to 19°F. Easy to apply in a single coat with resistance to hydrocarbons at elevated temepratures; Enviroline 2405 series are the linings of choice in the Oil& Gas Industry.
Lining
Interline 2981
Interline 2981 is ideal for when a solvent free phenolic epoxy lining is required for crude oil storage tanks at temperatures up to 60ºC. Designed for both new construction and M&R, it is suitable for application over fresh or pitted steel. Interline 2981 is applied with single leg spray equipment and its excellent spray characteristics ensure easy coverage of the substrate, reducing application time.
Lining
Interbuild 1004
Interbuild 1004 is a high performance, two component epoxy primer with excellent chemical and abrasion resistance. It exhibits good penetration properties to ensure good adhesion on concrete floors. Interbuild 1002 is especially suited for properly prepared concrete substrates.
Lining
Interbuild 1071
Interbuild 1071 is a two component, solvent free, heavy duty epoxy floor coating. It is a self smoothing, easy to apply product, leaving a seamless surface. It has excellent chemical, abrasion and impact resistance designed as part of a thin film coating system.
Lining
Interline 9670
A two component, solvent free glass reinforced epoxy laminate system.
Lining
Interline 961
A two component, solvent based epoxy phenolic tank lining for application to both new steel, or lightly pitted surfaces.
Lining
Interline 859
A two component, chemically resistant, high solids, high build epoxy phenolic tank lining providing static dissipation properties.
Lining
Ceilcote 64 Lining
CEILCOTE 64 Lining is a heavy-duty lining that protects steel and concrete in immersion service from strong chemicals. The lining is formulated from polyester resin, inert fillers, and fiberglass reinforcement. It can withstand solution temperatures to 160°F (71°C) in immersion service.
Lining
Interline 967
A two component, solvent free glass reinforced epoxy laminate system.
Lining
Ceilcote 389 Hybricrete
CEILCOTE 389 Hybricrete is a revolutionary, new, high performance system designed to provide exceptional resistance to aggressive chemicals such as methylene chloride, acetone, methanol, nitric acid and n-methylpyrrolidone.
Lining
Interline 104
A two component solvent based inorganic zinc rich ethyl silicate tank lining.
Lining
Ceilcote 505M FDA Coroline
The CEILCOTE 505M FDA Coroline is a 1/8" nominal thickness epoxy lining containing graded silica filler and reinforced with one layer of heavy glass fabric. It is an established, proven chemical-resistant epoxy lining, designed for use as either a lining for metal or concrete surfaces or as a corrosion resistant floor topping. It is widely used in areas of dilute acid and high caustic environments and complies with requirements of the Food and Drug Administration (FDA).