BACK TO PRODUCTS

Passive Fire Protection

Speciality Coating

CASES

Fireproofing an offshore giant

Filter by

Products

24 Product Found
My Filters
    Passive Fire Protection
    Chartek 1620CSP
    Chartek 1620CSP is a unique intumescent material that provides combined hydrocarbon fire protection and insulation when exposed to cryogenic liquids. A high build, solvent-free, two component epoxy, Chartek 1620CSP also provides excellent corrosion protection and blast resistance. * Please note this product is only available in North America.
    Passive Fire Protection
    Interchar 3120
    Interchar 3120 provides thin and thick film capabilities, easy to apply and durable epoxy intumescent coating that provides cellulosic passive fire protection (PFP) for off site applied structural steel. It increases production efficiency, reduces site work and coating schedules.
    Passive Fire Protection
    Chartek 8E
    Boron-free Chartek 8E provides exceptional pool fire performance with up to 30% lower installed weight compared to alternative PFP products, allowing for greater flexibility in structural design. It improves coating efficiency through reduced number of coats and no mesh requirement for up to 60 minutes pool fire duration.
    Passive Fire Protection
    Chartek 2218
    Chartek 2218 is our latest epoxy PFP system for installations requiring certification to the UL 1709 standard. Using patented technology, it offers our lowest certified thickness for longer duration fires. Boron-free Chartek 2218 is certified for up to four hours pool fire protection in addition to being jet fire tested. Simplified installation and unique rapid cure, even at low temperatures, enable faster application, improve production rates and reduce overall costs.
    Passive Fire Protection
    Interchar 1290
    Interchar 1290 is a single component, low VOC, borate and chlorine free, waterborne acrylic intumescent coating designed for onsite application to structural steel requiring protection from cellulosic fire. Interchar 1290 will maintain your architectural aesthetics for fire resistance periods up to 180 minutes on hollow steel sections.
    Passive Fire Protection
    Interkote 1460
    Formulated with bauxite, Interkote 1460 provides cost-effective resistance for up to four hours hydrocarbon pool fire in accordance with UL 1709. Interkote 1460 is ideally suited for onshore facilities where onsite application of cement-based PFP is preferred.
    Passive Fire Protection
    Interchar 963
    A one component, solvent borne, high solids intumescent coating independently tested at accredited laboratories to assess fire protection performance on structural steelwork in accordance with a range of standards.
    Passive Fire Protection
    Interchar 973
    A single component, solvent borne, high solids intumescent coating independently tested to assess fire protection performance on structural steelwork to in accordance with a range of standards.
    Passive Fire Protection
    Intertherm 7050
    Intertherm 7050 is a high performance, durable solvent-free epoxy for use in hot or cold conditions, where long term corrosion protection and thermal insulation are required. Low installed weight and excellent damage and impact resistance make Intertherm 7050 ideal for offsite module fabrication. Duplex systems with Chartek provide both fire and cryogenic spill protection.
    Passive Fire Protection
    Interchar 212
    Solvent-free Interchar 212 is a high build, robust, two component modified epoxy intumescent providing damage resistant fire and corrosion protection for the most demanding construction projects. Interchar 212 has excellent mechanical and physical properties, all backed up by rigorous third party testing and approvals.
    Passive Fire Protection
    Interchar 1160
    Interchar 1160 is a single component waterborne intumescent coating designed for onsite application. With zero VOC, Interchar 1160 offers a more environmentally friendly option for protection of structural steelwork, especially where aesthetics are important. Interchar 1160 is independently tested for up to 60 min fire in internal environments.
    Passive Fire Protection
    Interchar 2060
    Interchar 2060 provides 60 minutes fire protection via single coat application while maintaining architectural aesthetics. It is a class leading single component, low VOC intumescent coating suitable for onsite and offsite application. Tested and certified to the highest standards, Interchar 2060 offers rapid drying times for fast handling and throughput.
    Passive Fire Protection
    Chartek 1960 CSP
    Chartek 1960CSP intumescent material combined hydrocarbon fire protection and insulation against cryogenic liquid exposure.
    Passive Fire Protection
    Chartek 7E
    A self-reinforced epoxy coating, Chartek 7E simplifies application giving the oil and gas industry more choice and greater efficiency than ever before. Chartek 7E offers outstanding pool and jet fire resistance for up to two hours and a significant reduction in installed weight against other PFP products in the market.
    Passive Fire Protection
    Interchar 1120HY
    A single component, borate and chlorine free, water borne intumescent coating designed for on-site application to interior exposed structural steel requiring protection from cellulosic fire. Interchar 1120HY is a low VOC acrylic intumescent material independently fire tested for up to 3 hour fire ratings in accordance with ASTM E119/UL263.
    1. 1

    Sorry, we couldn't find any results
    Fetching the data, please wait...