Primer
Intergard 214
A two component epoxy sealer coat pigmented with aluminium flake.
Filter by
Products
My Filters
Primer
Intergard 2509
A two component, low VOC, high solids, epoxy primer containing zinc phosphate anti-corrosive pigmentation. This primer's versatile properties provide optimised control where thin film application is required.
Primer
Interdur 8805
A two component, rapid recoat, fast curing solvent based inorganic zinc rich ethyl silicate primer. Conforms to SSPC Paint 20 Level 3. Available in ASTM D520, Type II zinc dust version as standard.
Primer
Interdur 8802
A two component epoxy zinc phosphate/micaceous iron oxide primer, formulated on proprietary polymer technology, which provides rapid cure and overcoating even under low temperature conditions. A high solids, low VOC product. CHINA ONLY
Primer
Interdur 8816
A two component, metallic zinc rich epoxy primer, which complies with the composition requirements of Chinese Chemical Industrial Standard HG/T3668.
Primer
Cathacoat 304V
Two component solvent based inorganic zinc rich ethyl silicate based primer.Meets SSPC Paint 20 requirements.
Primer
Cathacoat 304L
A fast drying, heavy duty, inorganic zinc primer for all high performance coating systems designed to protect steel structures in severe service. Meets SSPC Paint 20 requirements.
Primer
Interdur 8807
Interdur 8807 is a two component solvent based inorganic zinc rich ethyl silicate based primer. CHINA ONLY
Temporary Protection
RELEST Wind ProcessCoat - I373-2050
RELEST Wind ProcessCoat is a Solvent-free translucent 2K polyurethane for use as an in-mold gelcoat with low film thicknesses. Utilizing the new generation of UV absorbers allows for temporary outdoor storage of uncoated rotor blades, without the risk of UV light damaging the substrate. The product's great sandability facilitates the further treatment of demoulded rotor blades and forms an excellent, pore-free basis for subsequent coatings.
Primer
Interdur 8817
A two component, metallic zinc rich epoxy primer, which complies with the composition requirements of Chinese Chemical Industrial Standard HG/T3668.
Primer-Finish
RELEST Wind Adhesion Promoter - I367-0080
RELEST Wind Adhesion Promoter is a two component polyurethane material designed to ensure optimal adhesion for PVC, aluminium cast, CDC, PMAA and GRP based on epoxy or polyester. It is is especially suited for use in combination with wear protection coatings for rotor blades.
Primer
Interdur 8810
A two component, metallic zinc rich epoxy primer which complies with the composition and performance requirements of HG/T3668. CHINA ONLY
Primer
Intergard 2575
A two component, high solids, low VOC, fast-curing epoxy zinc phosphate/micaceous iron oxide primer offering excellent barrier protection. Suitable for overcoating within 2 hours under common climatic conditions. Early handling properties make this an ideal primer for speeding up production and throughput.
Primer
Interbuild 1072
Interbuild 1072 is a low VOC, two component high build, high solids epoxy floor coating, reinforced with high aspect ratio glass flake. It has excellent chemical, abrasion and impact resistance. Can be applied directly in two coats or on approved primers depending on the conditions of the concrete substrate. Interbuild 1072 is designed to be used in high traffic areas.