Structural Concrete: Repair and Protection

Speciality Coating

Filter by

Products

46 Product Found
My Filters
    Structural Concrete- Repair and Protection
    Intercrete 4894
    A single component, low VOC, waterborne, translucent coating that offers an excellent defence against carbon dioxide ingress and the effects of weathering, significantly prolonging the maintenance free life of buildings and structures. Applied over a complementary pigmented Intercrete base coat system, it forms a translucent reflective metallic satin finish to create a feature appearance. It prevents water ingress, yet allows damp substrates to breathe and dry out, and is both dirt and UV resistant. Protection from the growth of mould and fungi is assured with the use of advanced encapsulated biocide technology to help maintain its appearance.
    Structural Concrete- Repair and Protection
    Intercrete 4851
    A two component, fast drying, water based epoxy and polymer modified cementitious flooring for the protection of concrete substrates.Intercrete 4851 exhibits both excellent flow characteristics and ease of application by pouring or pumping techniques to give a smooth surface finish. *Selective Countries Only - Please contact your local representative.
    Structural Concrete- Repair and Protection
    Intercrete 4852
    A two component, fast drying, water based epoxy and polymer modified cementitious flooring for the levelling and protection of concrete substrates.Intercrete 4852 exhibits both excellent flow characteristics and ease of application by pouring or pumping techniques to give a smooth surface finish. *Selective Countries Only - Please contact your local representative. * Please note this product is only available in North America.
    Structural Concrete- Repair and Protection
    Intercrete 4890
    Intercrete 4890 is a single pack, low VOC, water-based, modified styrene acrylic copolymer decorative concrete coating that provides excellent protection against carbonation and water ingress without entrapping moisture within damp substrates. Elastomeric properties enable the system to accommodate hairline cracks and substrate movement while providing lasting protection. Adhesion is excellent to mineral substrates.
    Structural Concrete- Repair and Protection
    Intercrete 4892 (formerly Monodex Textured Series 2)
    A high quality, single component, low VOC, water-based, textured acrylic, protective and decorative coating for masonry surfaces. Based on an advanced micropolymer resin binder which cross-links to afford excellent durability, it effectively waterproofs the surface for many years, yet allows high levels of entrapped substrate moisture to escape without causing blistering or delamination. The resin-rich coating encapsulates the individual textured particles without leaving thin areas over particle peaks. It has an elastomeric formulation, bridging hairline cracks and facilitating substrate movement without cracking or flaking. It is available in a range of attractive colours, and an active biocide inhibits mould and lichen growth.
    Structural Concrete- Repair and Protection
    Intercrete 4880 (formerly Biodex HB Series 2)
    A single component, water-based (VOC-free), elastomeric, high build hygiene coating for walls and ceilings in demanding service conditions. Intercrete 4880 is a resin-rich biostatic membrane that incorporates the latest encapsulated protectant technology in combination with silver ions to give completely safe use and zero leaching into the surrounding environment. It effectively prevents the growth of mould and bacteria whilst proven silver ion technology has recognised benefits in limiting the spread of germs. The unique in-film chemistry allows for the ultra-slow, controlled release of active ingredients into the coating film throughout a long service life, even where harsh cleaning regimes are followed.
    Structural Concrete- Repair and Protection
    Intercrete 4807 (formerly Ttiefill)
    A single component, water-based (VOC free), polymer modified, fibre reinforced, Portland cement based repair compound which exhibits unique hydraulic properties to produce a rapid setting curing mortar with enhanced polymer properties.
    Intercrete 4807 is ideally suited for the filling of voids, particularly in new construction, which needs to be rapidly put into service, such as tieholes, grout holes and voids around fixings.
    Structural Concrete- Repair and Protection
    Intercrete 4842
    A two component, polymer modified, elastomeric cementitious coating for the protection of concrete and masonry which exhibits cracking and where further movement is expected. *Selective Countries Only - Please contact your local representative.
    Structural Concrete- Repair and Protection
    Intercrete 4805 (formerly Monopour)
    A single component, water-based (VOC free), high performance, polymer modified, non-shrink cementitious formulation. Intercrete 4805 is a flowing grout with a maximum aggregate size of 2.5mm for application thicknesses up to 100mm.
    Structural Concrete- Repair and Protection
    Intercrete 4870
    A single component, water based acrylic curing membrane designed for use with the Intercrete repair and protection systems. *Selective Countries Only - Please contact your local representative.
    Structural Concrete- Repair and Protection
    Intercrete 4800 (formerly Monomix WS)
    A single component, water-based (VOC-free), polymer modified, fibre reinforced, low density cementitious repair mortar. The thixotropic nature of the product enables easy high build hand and trowel application for the structural repair of voids and the rendering and re-profiling of vertical, horizontal and overhead surfaces. Intercrete 4800 is supplied as a single pack system requiring only the addition of clean water.
    Structural Concrete- Repair and Protection
    Intercrete 4894 (formerly Monodex Metallic)
    A single component, low VOC, waterborne, translucent coating that offers an excellent defence against carbon dioxide ingress and the effects of weathering, significantly prolonging the maintenance free life of buildings and structures. Applied over a complementary pigmented Intercrete base coat system, it forms a translucent reflective metallic satin finish to create a feature appearance. It prevents water ingress, yet allows damp substrates to breathe and dry out, and is both dirt and UV resistant. Protection from the growth of mould and fungi is assured with the use of advanced encapsulated biocide technology to help maintain its appearance.
    Structural Concrete- Repair and Protection
    Intercrete 4806 (formerly Monopour)
    A single component, water-based (VOC free), high performance, polymer modified, non-shrink cementitious formulation. Intercrete 4806 is a micro-concrete with a maximum aggregate size of 6mm for larger depths up to 200mm
    Structural Concrete- Repair and Protection
    Intercrete 4850
    A single component, water based acrylic primer designed to stabilise and seal concrete floors prior to the application of Intercrete products. *Selective Countries Only - Please contact your local representative. * Please note this product is only available in North America.
    Structural Concrete- Repair and Protection
    Intercrete 4820
    Supplied as a single component, fibre reinforced, waterproof screed or fairing coat.Requires the addition of clean water at site. *Selective Countries Only - Please contact your local representative.
    Fetching the data, please wait...