Lining
Enviroline 376F-30LT
Low Temperature Application and Cure Tank Lining.
BACK TO PRODUCTS
Mining
Proven Coatings for Durability and Efficiency
- Extend the lifespan of production facilities.
- Reduce downtime to improve cash flow.
- Backed by an extensive track record of performance.
Filter by
Products
My Filters
Surface Tolerant
RELEST Wind Putty Porefiller - I372-5915
RELEST Wind Putty Porefiller is a 2K polyurethane for filling medium pinholes. UV- and weather- resistant with very fast drying properties and long workable life. It is compatible with all RELEST coating systems and can be recoated without sanding.
Surface Tolerant
Interseal 670HS Low Temperature
A low VOC, two component high build, high solids surface tolerant epoxy maintenance coating.Specially designed with an enhanced curing profile to maximise productivity in cold conditions
Primer-Finish
Interzone 9545
A two component, ultra-low VOC, fast curing, hybrid epoxy technology. As a heavy duty epoxy barrier coating formulated for single leg airless spray application Interzone 9545 is designed to provide long term corrosion protection in aggressive offshore environments. Approved to Norsok M-501 System 7A and 7B Interzone 9545 shows excellent corrosion resistance to abrasion and cathodic disbondment.
Primer
Intergard 7500
A two component, high volume solids, abrasion resistant pure epoxy coating pigmented with aluminium that provides excellent long term anti-corrosive protection. Intergard 7500 is capable of fast cure and has low temperature cure properties. Ideally suited for use as a universal primer in protecting underwater areas, splashzones, decks and structural steel.
Other
RELEST Wind Leading Edge Cartridge
RELEST Wind LEP Cartridge is a two-component solvent-free polyurethane coating which is especially designed for protecting the leading edge of rotor blades of wind energy plants from erosion damage caused by rain, sand, hail, dirt and other particles suspended in the air. The coating consists of an exceptionally fast, hard wearing, UV- and abrasion resistant polyurethane elastomer. It is supplied in a convenient 2-component cartridge for direct application of minimal quantities without weighing.
Primer
Interprime 1068
Interprime 1068 is an air drying Zinc Phosphate Primer designed for application to all types of steel surfaces. This primer is characterised by good anti-corrosive properties, easy application and the ability to protect hand cleaned steel. Interprime 1068 is primarily intended as a single coat system for use in mildly corrosive environments, classified in ISO12944-2 as up to and including C2.
Finish
Intercryl 530 (Formerly Devcryl 1448)
A premium quality, low VOC, direct to metal acrylic semi-gloss enamel for high traffic interior - exterior areas of commercial, institutional and industrial structures. *Please note this product is only available in North America.
Filler
RELEST Wind Putty Contour Cartridge - I373-3715
RELEST Wind Putty Contour Cartridge is a Solvent-free, highly viscous polyurethane putty for smoothing surface and contour irregularities. Its easy sanding and rapid cure properties offers increased productivity for further processing and recoating. RELEST Wind Putty Contour is ideally situated for mechanical application. It is supplied in a convenient 2-component cartridge for direct application of minimal quantities without weighing.
Surface Pre-Treatment
Interplus 4101
A single component, water-based rust remover / cleaner gel. Clean Gel is 100% biologically degradable, free for toxins and conforms to the yellow classification of the Harmonised Offshore Chemical Notification Format (HOCNF).
Passive Fire Protection
Chartek 1960 CSP
Chartek 1960CSP intumescent material combined hydrocarbon fire protection and insulation against cryogenic liquid exposure.
Finish
Devthane 379N
A low VOC, two component modified acrylic polyurethane finish giving excellent durability and long-term
recoatability, for use over correctly prepared primed surfaces. This product is also HAPS free and
exempt solvent free.
recoatability, for use over correctly prepared primed surfaces. This product is also HAPS free and
exempt solvent free.
Primer-Finish
Intergard 452
Intergard 452 is a two component, high build epoxy intermediate. Pigmented with micaceous iron oxide to comply with the requirements of BS5493:1977
Surface Tolerant
Interseal 670HS Temperate
A low VOC, two component high build, high solids surface tolerant epoxy maintenance coating. For use in temperate and warm environments.
Other
Interbuild 1081
Interbuild 1081 is a pigmented, solvent free, self-smoothing, Epoxy overlay system designed to provide seamless protection of Concrete substrates from 2mm to 5mm. Interbuild 1081 will provide a gloss finish with excellent wear characteristics and abrasion resistance, high levels of chemical resistance and an easy to clean smooth finish.