A low VOC, two component, high solids, internally flexibilised, surface tolerant epoxy primer/intermediate.

A phosphoric acid based mordant solution for treating galvanised steel.

A one component, alkyd resin based anti-corrosive primer containing zinc phosphate pigment. Contains no toxic or environmentally hazardous lead or chromate based pigments.

Interprime 484 is an air drying Zinc Phosphate Primer designed for application to all types of steel surfaces.This primer is characterised by good anti-corrosive properties, easy application and the ability to protect hand cleaned steel.

A revolutionary reinforced PVB single pack primer combining in one application etching and pre- treatment qualities for the preparation of ferrous and non-ferrous surfaces. This product has UK welding and Health certificates

Interzinc 125 is a self curing ethyl silicate based zinc rich coating with the zinc powder incorporated into the liquid component to give a single pack product.This product complies with the composition and performance requirements of SSPC Paint 20 and is characterised by excellent anticorrosive properties and easy application.

A single component, water based paint disbonder designed to remove coating residues from metallic substrates.Can be described as readily biodegradable as tested by OECD 301B CO2 Evolution test.

A single component solvent based cleaner/degreaser, which can be described as readily biodegradable as tested by OECD 301B CO2 Evolution test.

A solvent free, two component, high build, surface tolerant epoxy coating capable of being applied as a single or multi-coat system over abrasive blasted, hydroblasted or mechanically prepared steel surfaces.

A three component, metallic, zinc rich epoxy primer which passes Slip B coefficient. Interzinc 315B complies with SSPC Paint 20 and contains minimum 80% zinc in the dry film.The zinc dust used in Interzinc 315B conforms to ASTM D520, Type II.