Mining

Product Applications

With an extensive track record, our coatings are proven to extend the design life of the production facilities and improve cash flow due to less downtime.

Filter by

Product Chemistry

Volume Solids

VOC(EPA Solvent)

Gloss Level

Number of Components

Attributes

Fire Type

Certifications

Fire Duration (minutes)

Water and Waste

Mining

Transportation and Pipeline

Buildings

Wind Power

Thermal Power

Onshore Oil and Gas facilities

Offshore Oil and Gasfacilities

Product Line

Range

Dry time

Low temperature Cure (5 Celsius)

Structural Repair

Temperature Resistance

Lining

Passive Fire Protection

178 Products

Interplus 1180HB

Product Type
Primer-Finish
Chemistry
Epoxy

Interplus 1180HB is an economical high build epoxy capable designed for the long term protection of structural steel with a single coat.

Enviroline 376F-60LT

Product Type
Lining
Chemistry
Epoxy Novolac

Low Temperature Application and Cure Reinforced Lining. Solvent Free, two component polycyclamine cured lining system utilising advanced epoxy novolac technology with flake and fibre reinforcement.

Interseal 3377

Interseal 3377 is designed to provide excellent short term protection against a wide range of contaminants such as dust, oil, grease, grinding debris, fly rust and coating application overspray whilst providing a degree of resistance to abrasion, grinding debris and scuffing. The dual protective and unique peelable properties of Interseal 3377 make it ideal for use in those market areas where coated substrates require temporary protection against incidental contamination and damage, such as that experienced during transit or in a fabrication - assembly construction process. Interseal 3377 can assist in providing a significant reduction in immediate and longer term coating maintenance costs whilst improving productivity during assembly and installation.

Interchar 3120

Product Type
Passive Fire Protection
Chemistry
Modified Epoxy Intumescent

Interchar 3120 provides thin and thick film capabilities, easy to apply and durable epoxy intumescent coating that provides cellulosic passive fire protection (PFP) for off site applied structural steel. It increases production efficiency, reduces site work and coating schedules.

Intercrete 4803 (formerly Monolite)

Product Type
Structural Concrete: Repair and Protection
Chemistry
High Build Structural Repair Mortar

Specifically designed for the non-structural repair and reinstatement of concrete, brick or stone substrates. Intercrete 4803 is a low density, lightweight, fibre reinforced, polymer modified shrinkage compensated mortar that exhibits high bond strength exceeding the tensile strength of concrete, ensuring monolithic performance of the repair. Can be applied up to 100mm in a single layer in vertical, horizontal and overhead situations. CE-marked in accordance with EN 1504-3 Class R2. Suitable for repair methods 3.1, 7.1, 7.2 as defined by BS EN 1504-3.

Intercrete 4804 (formerly Marine Mortar S)

Product Type
Structural Concrete: Repair and Protection
Chemistry
Structural Repair Mortar

Specifically designed for the structural repair and profiling of vertical, horizontal and overhead surfaces in marine and tidal areas which are subject to early immersion. Intercrete 4804 is a thixotropic mortar which allows easy trowel application whilst enabling high application thicknesses up to 50mm per layer in both vertical and horizontal applications. Excellent resistance to wash-out soon after application. CE-marked in accordance with BS EN 1504-3 Class R4. Suitable for repair methods 3.1, 3.2, 7.1, 7.2 as defined by BS EN 1504-3.

Intercrete 4805 (formerly Monopour)

Product Type
Structural Concrete: Repair and Protection
Chemistry
Structural Repair Mortar

Specifically designed for the structural repair of large areas of concrete and heavy duty applications beneath base plates, plinths and stanchion bases where a pourable or flowable material is required. Intercrete 4805 utilises a dual expansion mechanism which compensates for shrinkage in the plastic and hardened state and cures rapidly to give high early and long term strength development, enabling quick reinstatement. The dense matrix provides excellent protection from the ingress of acid gases, moisture and chlorides.

Intercrete 4807 (formerly Ttiefill)

Product Type
Structural Concrete: Repair and Protection
Chemistry
High Build Structural Repair Mortar

Specifically designed for the filling of tieholes formed by formwork bolts in new construction, particularly where a rapid setting, durable, waterproof mortar is required. Can also be used for sealing grout holes and voids around fixings in pre-cast elements. Intercrete 4807 sets in 30 minutes at 20°C, yielding a durable, high strength mortar which provides a waterproof seal which withstands 10 bar water pressure after only 72 hours curing. Non-toxic when cured and WRAS approved for use incontact with potable water. CE-marked in accordance with BS EN 1504-3 Class R4. Suitable for repair methods 3.1, 7.1, 7.2 as defined by BS EN 1504-3.

Intercrete 4806 (formerly Monopour)

Product Type
Structural Concrete: Repair and Protection
Chemistry
Structural Repair Mortar

Specifically designed for the structural repair of large areas of concrete and heavy duty applications beneath base plates, plinths and stanchion bases where a pourable or flowable material is required. Intercrete 4806 utilises a dual expansion mechanism which compensates for shrinkage in the plastic and hardened state and cures rapidly to give high early and long term strength development, enabling quick reinstatement. The dense matrix provides excellent protection from the ingress of acid gases, moisture and chlorides.

Intercrete 4809 (formerly Fastfil WP)

Product Type
Structural Concrete: Repair and Protection
Chemistry
High Build Structural Repair Mortar

Specifically designed for arresting water seepage and infiltration under pressure through cracks, joints, and voids in concrete and masonry. Intercrete 4809 sets in 2 minutes at 20ºC, yielding a durable, high strength mortar which provides rapid sealing and jointing in and around pipework or for forming fillets in tanking situations.

Pages