Mining

Product Applications

With an extensive track record, our coatings are proven to extend the design life of the production facilities and improve cash flow due to less downtime.

Filter by

Product Chemistry

Volume Solids

VOC(EPA Solvent)

Gloss Level

Number of Components

Attributes

Fire Type

Certifications

Fire Duration (minutes)

Water and Waste

Mining

Transportation and Pipeline

Buildings

Wind Power

Thermal Power

Onshore Oil and Gas facilities

Offshore Oil and Gasfacilities

Product Line

Range

Dry time

Low temperature Cure (5 Celsius)

Structural Repair

Temperature Resistance

Lining

Passive Fire Protection

177 Products

Intercrete 4800 (formerly Monomix WS)

Product Type
Structural Concrete: Repair and Protection
Chemistry
Structural Repair Mortar

Specifically designed for the general purpose structural repair and reinstatement of concrete in single coat applications up to 80mm in a single layer. Intercrete 4800 offers low permeability to water at 10 bar positive and negative pressure along with excellent resistance to carbon dioxide gas and chloride ion diffusion. CE-marked in accordance with BS EN 1504-3, Class R3. Suitable for repair methods 3.1, 3.3, 7.1, 7.2 as defined in BS EN 1504-3.

Intertherm 2205

Product Type
Temperature Resistance
Chemistry
Hot Spread Epoxy

Intertherm 2205 is a specialist temperature resistant maintenance coating, designed to resist corrosion under insulation (CUI) and high temperatures up to 230°C (446°F). Based on innovative, hot spread epoxy technology Intertherm 2205 shows excellent application characteristics and can be brush applied to hand prepared, hot steel up to 205°C (401°F).

Intercrete 4810 (formerly Polymer Admixture 850)

Product Type
Structural Concrete: Repair and Protection
Chemistry
Concrete Primer

For polymer modification of sand and cement mortars to provide enhanced mechanical characteristics: When mixed with cement, can be used as a primer and a bonding agent for polymer mortars, renders and screeds. Can also be diluted with water to produce a primer for roof and deck applications in the clean water industry. WRAS Approved for use in contact with potable water.

Enviroline 405HTR MR System

Enviroline 405HTR MR is a reinforced chemcial resistant system. The system features a high temperature reesistant, 100% volume high solids, two component polycyclamine cured lining topcoat. Fibre glass mat reinforcement increases physical properties and where necessary allows dynamic crack bridging in concrete. In the table below you can find System Sheet and Application guidelines. For Technical Datasheets and MSDSs please click on the links to the individual component products of the system below the table.

Interline 955 MR System

Interline 995 MR Flakeline is a reinforced chemical resistant system. The system features a glass flake filled novolac vinyl ester topcoat for long-term chemical and heat resistance and fibre glass mat reinforcement to increase physical properties and where necessary bridge dynamic cracks in concrete. In the table below you can find System Sheet and Application guidelines. For Technical Datasheets and MSDSs please click on the links to the individual component products of the system below the table.

Interline 984 MR System

Interline 984 MR is a reinforced chemcial resistant system. The system features a 100% volume high solids, two componentepoxy phenolic topcoat. Fibre glass mat reinforcement increases physical properties and where necessary allows dynamic crack bridging in concrete. In the table below you can find System Sheet and Application guidelines. For Technical Datasheets and MSDSs please click on the links to the individual component products of the system below the table.

Intercrete 4816

Product Type
NOT TRANSLATED
Chemistry
Concrete Primer

Intercrete 4811 (formerly Bond-Prime)

Product Type
Structural Concrete: Repair and Protection
Chemistry
Concrete Primer

Designed to be used to treat a range of substrates, including: Concrete Mortars and Renders, Masonry, Polyurethane Foam, Phenolic Board Existing Paints Plaster and Intercrete Concrete Repair Mortars. Intercrete 4811 enhances bond by combining penetration into the pore structure with a surface film-forming effect to produce a stabilised, sound surface ideal for treatment. Reacts with subsequently applied coatings to provide a chemical bond giving excellent adhesion and dries quickly without the release of hazardous solvents and can be overcoated after just 1 hour.

Intercrete 4854 (formerly Cemprotec EF Grit)

Product Type
Structural Concrete: Repair and Protection
Chemistry
Aggregate

Specifically designed to be broadcast into the surface of INTERCRETE coatings to aid curing and provide a durable slip and abrasion resistant finish. INTERCRETE 4854 grit provides a hard-wearing, slip-resistant surface which will provide ultimate protection against foot traffic, wheelchair use, impact from heavy objects and attack from the elements.

Intercrete 4874 (formerly Cemprotec 2000-BJT)

Product Type
Structural Concrete: Repair and Protection
Chemistry
Flexible Waterproof Sealing Tape

Supplied as a 100mm wide preformed strip on siliconised release paper, the backing strip is simply removed upon application. Non-toxic and approved for use in contact with potable water, Intercrete 4874 is ideal for use in a wide range of waterproofing applications, such as reservoirs, water tanks, roof slab and projects in enclosed locations where it is not suitable to use solvent-based or hot welded products

Pages