BACK TO PRODUCTS

All Products

Filter by

Products

42 Product Found
My Filters
    Surface Tolerant
    RELEST Wind Putty Porefiller Cartridge - I372-5615
    RELEST Wind Putty Porefiller is a 2K polyurethane for filling small pinholes. UV- and weather- resistant with very fast drying properties and long workable life. It is compatible with all RELEST coating systems and can be recoated without sanding. It is supplied in a convenient 2-component cartridge for direct application of minimal quantities without weighing.
    Finish
    Interthane 1026
    A two component, high build, acrylic polyurethane primer/finish providing anti-corrosion barrier protection and long term recoatability.
    Temporary Protection
    RELEST Wind ProcessCoat - I373-2050
    RELEST Wind ProcessCoat is a Solvent-free translucent 2K polyurethane for use as an in-mold gelcoat with low film thicknesses. Utilizing the new generation of UV absorbers allows for temporary outdoor storage of uncoated rotor blades, without the risk of UV light damaging the substrate. The product's great sandability facilitates the further treatment of demoulded rotor blades and forms an excellent, pore-free basis for subsequent coatings.
    Primer-Finish
    Interthane 1014
    Finish
    Interthane 1024
    A two component, fast drying, acrylic polyurethane finish giving excellent durability and long term recoatability.
    Primer-Finish
    RELEST Wind Adhesion Promoter - I367-0080
    RELEST Wind Adhesion Promoter is a two component polyurethane material designed to ensure optimal adhesion for PVC, aluminium cast, CDC, PMAA and GRP based on epoxy or polyester. It is is especially suited for use in combination with wear protection coatings for rotor blades.
    Finish
    Interdur 8860HS
    A two component, high solids acrylic polyurethane finish giving excellent durability and long term recoatability.
    Primer-Finish
    Devthane 349
    A high build, high performance, two-component chemically-cured polyaspartic aliphatic urethane gloss finish. *Please note this product is only available in North America.
    Finish
    Interthane 138
    A two component acrylic polyurethane finish giving excellent durability and long term recoatability
    Finish
    Interthane 990FD
    A two component fast dry acrylic polyurethane finish giving excellent durability and long term recoatability. Interthane 990FD is a regional product, supported in North America.
    Finish
    Interthane 1027
    A two component, high build, acrylic polyurethane primer/finish providing anti-corrosion barrier protection and long term recoatability.
    Finish
    Interthane 870UHS
    A low VOC, high build, semi-gloss urethane finish with excellent gloss and colour retention on exterior exposure, for use over correctly prepared and primed surfaces.The VOC is below 250 g/l to conform to local VOC regulations.
    Finish
    Interthane 990HS
    A low VOC, two component acrylic polyurethane high performance finish coat with excellent gloss and colour retention on exterior exposure, for use over correctly prepared primed surfaces.
    Primer-Finish
    Devthane 389N
    A high performance, two-component chemically-cured aliphatic urethane gloss finish. *Please note this product is only available in North America.
    Finish
    Interdur 8860
    A two component acrylic polyurethane finish giving excellent durability and long term recoatability.
    1. 1

    Sorry, we couldn't find any results
    Fetching the data, please wait...